York? Flap Wheels

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Boxed in 10s except for 60 x 50 and 80 x 50 which are packed in 6s. Recessed hub design for maximum access in tight corners.

6mm Shank

50mm Dia x 30mm Height 12,300 MOS (rpm)

Kennedy® Sharpening Stones

Aluminium Oxide man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.

Square Aluminium Oxide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

Magtron Magnetic Drilling Machines

Unique power unit gives constant torque and speed regulation even under load. Powerful magnet has a clamping force of 1410kg/3100lbs. This machine has a slow start and infinite variable speed. It has a slipping clutch to protect against breakage of cutters and comes complete with an oil coolant system to automatically lubricate the cutters. The gear box is mounted directly onto the cradle for extra rigidity supplied with 3 morse taper arbor, morse drift key, safety chain, carabina hook, hexagon keys, carry case.

MBE100 Variable Speed Mill/Drill System

Dimensions (H x W x L): 500mm x 135mm x 312mm. Power input: 1800W.

York? Abrasives Pre-Finish & Polishing Compounds

York? Abrasives have a compound bar for every polishing job! They are manufactured using the finest quality ingredients to ensure that you get the highest quality results every time on all metals, plastics and glass. They are excellent high performance polishing compounds, not too waxy and not too dry.

For the full range of York? Abrasives polishing mops and compounds please refer to our catalogue.

Fast Cutting Polishing Compound Bar

This composition produces a superb fast cutting bar to give a final polish on stainless steels, chrome plate and non-ferrous metals. Used generally for commercial finishes because it is clean to use and clears well. Dimensions: 43x218x57mm (HxWxD). Average weight: 1kg.

Ajax Machine Tools

Ajax vertical bandsaws are suitable for for cutting steels, alloys, plastics, wood and resins, the machines are a fabricated steel design ensuring rigidity and guaranteeing maximum working life.

The machine features variable blade speed and is fitted with a blade shear, welder, grinder and annealing unit, giving the facility of cutting internal shapes, by breaking the blade passing through component, welding grinding and annealing prior to cutting.
Fully CE marked.

Standard features
Emergency stop switch.
Variable speed with display.
Welder, grinder, annealing and shear.
Worklight.
Rip fence and mitre protractor.

Vertical Bandsaws

Model Number: AJVB400
Voltage: 400v/3ph 50Hz
Throat Depth: 410mm
Working Height: 300mm
Blade Length: 3350mm
Height: 1935mm
Blade speed: 20-500m/min.
Blade width: 16mm (5/8").
Motor rating: 2hp.
Table size: 600x500mm.
Table tilt: 15x4 ways.
Weight: 440kg

York? Flexible Abrasives

Abrasive covered foam for general-purpose sanding on wood.

Double-Sided Pads

Flexible abrasive coated sponge pads will conform to most contoured surface shape. Coated with abrasive on both sides. Available in three different grades. Size: 98 x 230 x 12.5mm.

York? Flat Reinforced Cutting Discs

Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatability. Not to be used for wet cutting.

Type 41

Grade A30/A24. For general-purpose use on metals.

3M EXL Unitised Discs Roloc? XL-UR

All products feature a unique twist on/twist off fixing system. Grade, size or product can be changed quickly and easily. Discs have no centre nut allowing all of the disc surface to be used, reducing production costs. Suitable for use with all types of portable drills, grinders, etc. Can be used "on-face" as a disc or "on-edge" as a wheel.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'A' Shape. Shank Diameter 6mm

Shape A2. Grade: RA46. Diameter: 25mm. Length: 32mm. Max. rpm: 38,000. Weight per 10: 380g.