Kemet Gesswein Abrasive Stones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Gesswein PW Aluminium Oxide (Sharp).

This stone excels at fast cutting on hard steel. Length 150mm.

Freud Circular Saw Blades

Anti-kickback Design: Kickback is caused by over-feed. It happens so quickly it can be impossible to react before injury occurs. On a table saw the wood is thrown back violently, on a radial arm saw the blade climbs quickly out of the cut and on a hand held saw the saw is pushed out of the cut. Freud's design reduces this. Each tooth is followed by a limiter, which restricts bite to the maximum safe amount. Teflon Coating. Resistant to friction and heat build-up. Teflon coated blades last longer, cleaning is easy and the distinctive coating also gives rust resistance.Whisper Quiet Expansion Slots: A question-mark shaped slot allows for the necessary expansion yet reduces noise. Laser Cut, High Strength Bodies: The use of precision lasers to avoid unwanted stress in the metal. The method also allows the use of higher strength steel (40 to 45 Rc). These bodies remain true, even after years of use. Tensioned Blades for Superior Flatness: Pre-tensioned blades ensure years of smooth operation. The process is computer controlled and was designed and built by Freud. Advanced Tri-Metal Tip Brazing: Copper alloy is sandwiched between layers of silver alloy (Copper is soft and will stretch without residual stresses, insulating the shoulders from impacts.)

Yellow Line - Coarse

Ripping blades, designed with a low TPI. suitable for cutting long grain solid wood.

Bosch SDS Max Combi Hammer Drills

Sturdy combi hammer drill with SDS-max toolholder for drilling up to 38mm diameter. With chisel function for universal application. Complete with carrying box, auxiliary handle, machine cloth, grease tube and operating instructions.

No load speed: 340rpm
Impact rate: 3000bpm
Max. impact energy: 9 Jules
Impact rate: 2900rpm
Max. bit dia.: 12-38mm
Max. core bit dia.: 40-90mm
Weight: 5.8kg

Available in 240V and 110V.

Engis Hyprez Oilstones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Hyprez D.S. Medium/Soft Aluminium Oxide

Pencil Type. This is a popular, fast-cutting stone which does not load easily. Good for all dies and moulds. Length: 150mm

Kemet Gesswein Abrasive Stones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Gesswein DF Medium/Soft Aluminium Oxide

This is a popular fast-cutting stone which does not load easily. Good for all dies and moulds. Length 100mm.

Kobe Eiko™ 13mm Hammer Drill

13mm impact drill with powerful 750W low noise motor. Easy select button for quick selection of drilling or impact drilling. 2-speed gear shift for easy high/low speed change. Variable speed and reverse switch. Specifications: Power input: 750W. No-load speed: 0-1300/3000rpm. Capacities: Concrete 20mm, Steel 13mm, Wood 40mm. Full load impact rate: 0-20800/48000rpm. Weight: 2.2kg. Standard accessories: side handle, depth gauge, chuck wrench, carrying case.

Available in 240V and 110V.

EDH720RE2

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

Trade Medusa Generators

Compact and lightweight - ideal for caravans, boats and building sites. Quiet running (67dB(A)), two stroke engine. Three pin UK socket outlet, 12V DC battery charging facility (40Ah batteries). Complete with two stroke oil, battery charger, leads and clips, spark plug socket, screwdriver set, leads, clamps and measuring cup. One year warranty.

03920 Trade Medusa Compact T951

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical 14

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

3M Flap Discs 566A

Good performance at an economical price. Available in P120 for finer blending, refining and finishing work.

Applications: weld grinding, stock removal, deburring, deflashing, gate removal, edge chamfering, cleaning, blending, finishing.
Materials: all metals.
Mineral: alumina zirconia.
Backing: X-weight cotton cloth on reinforced glass fibre resin.
Coating: closed.
Bond: resin.

Conical Flap Discs

Size: 125mm.
P40, P60, P80 and P120 grit.