Kobe? Multi Tool Accessories

A wide range of multi tool accessories that can be used for cutting, grinding, sharpening, polishing, sanding, shaping and slotting in soft metals, wood, plastics and fibreglass. Shank diameter: 3.2mm.

3M Stikit® Discs 338U

Aluminium oxide paper. For general purpose sanding. Fre-Cut coating inhibits premature loading to give a longer lasting product, particularly in fine grades. Features the 3M Stikit self-adhesive fastening system to ensure sheets remain firmly attached to Stikit accessories while in use. All general purpose sanding applications by hand or using portable sanding machines.
Use on: Wood, Paint/Lacquer, Fillers, Metal.
Mineral: Aluminium Oxide.
Backing: C-weight Paper.
Coating: Open.
Bond: Resin Over Glue.

Plain (no hole)

Diameter: 150mm.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'B' Shape. Shank Diameter 3mm

Shape B41. Grade: RA80. Diameter: 16mm. Length: 16mm. Max. rpm: 34,000. Weight per 10: 220g.

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

3M Scotch-Brite? Surface Conditioning Belts

For removing grinding marks and scratches leaving a greatly improved surface finish.

Hook and Loop Backed

For use with a regular (sanding disc) flexible backing pad.

Router Cutters

For cutting grooves/apertures and general shaping work. Single flute for maximum support behind the cutting edge, giving strength, while providing large clearance for ease of chip flow promoting fast free cutting.

Single Flute Straight Plunging Bits

Bosch Cordless Drills

Boschs Cordless Combi drills are built to last and are up to 20% faster then other drills in their class. With gear ratios optimised for hammer drilling and driving, the newly developed planetary gearbox delivers the corresponding power rate for that particular application.

Another Bosch innovation the air-cooled gearbox for optimised cooling of the entire drive chain at all times, with increased copper content in the motor winding guaranteeing superior overload capability for a longer lifetime.

The progressive clutch delivers high precision torque settings with 15% more torque being delivered for every screw diameter: 1-20 for small screws, 21-25 for large screws.

The soft grip with two different soft pads improves comfort and control and reduces fatigue when working.

GSB 14.4VE2 14.4V NiMH (2.6Ah) 13mm Cordless Combi Drill

GSB 14.4VE2 Specifications
Chuck Capacity: 13mm
No Load Speed: 0-470/0-1,950rpm
Blows per minute: 29,000bpm
Capacity In Steel: 13mm
Capacity In Wood: 35mm
Number of Torque Settings: 15
Maximum Torque: 65Nm
Weight: 2.8Kg

Supplied with: 1 hour Quick charger, 2 x 2.6 Ah NiMH battery pack and Carrying case.

Quantum Vitrified Bond Mounted Points

Quantum - Ceramic Abrasive Grain
Ideal for high volume foundry operations. Minimal loading and heat build up. Up to 33% longer abrasive life when compared to other ceramic abrasive products with 30% higher metal removal rates. Optimised for all low, medium and high force applications including grinding Inconel and similar alloy turbine blade components.

Kobe Eiko Power Tools

The Kobe Eiko ESC1200 165mm (6,1/2") circular saw has a lightweight and sturdy die cast aluminium base, with 0-90° graduations accurately marked making it ideal for cutting rebates, mitres or chamfers at any angle up to 45°, cutting wood away to start off a slot and cutting through tongued-and-grooved floorboards. Fitted with 40 tooth TCT blade suitable for cutting various types of wood. Fitted with blade guard and riving knife.

Available as:
110V Order Code: KBE-279-1620K
240V Order Code: KBE-279-1640K

ESC1200 165mm (6,1/2") Circular Saw

Eiko ESC1200 Specification:
Voltage: 240V.
Power input: 1,010W.
No load speed: 5,500rpm.
Cutting depth:
Depth of cut @ 90°: 57mm.
Depth of cut @ 45°: 38mm.
Weight: 3.4kg.

Supplied with: blade, wrench, parallel guide and hex key.

Trend Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

1/4" and 1/2" Shanks