Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Ball Nosed

Cut 3 - Rapid Cut
For use on softer non-ferrous and plastic materials i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.

Bosch Jigsaw Blades

Application: Mild steel, aluminium, non-ferrous metal up to 2mm (sheet metal under 1mm thick recommend wood backing). Wavy set & milled teeth. Effective length: 50mm. Pitch: 0.7.

All Hard HSS For Metal (Pack 5)

Burgess Engravers

Suitable for intricate engraving or security/identification marking. Each engraver is balanced to sit comfortably in the hand. The one hundred strokes per second penetrating pump action ensures the engraving point indents the workpiece rather than removing raw material from the workpiece, which could weaken it or change the molecular structure. The fine electro magnetic penetration adjustment allows use on a wide range of soft and hard materials including steel, plastic, glass and ceramics. Machined brass jaws prevent damage to engraving points if excess pressure is applied.

Engraving Points for Burgess Engravers

A2: for glass and steel. Solid carbide.
A4: for hardened steel. Carbide tipped.
A5: for soft metals and alloys.
A6/A7: ball points for metal embossing, hammering and leather work.
A8: abrasive point for frosting glass and smoothing.
A80: diamond point for fine glass engraving.

Engis Cones

Spindle diameter: 1/8" except* 1/4". 3mm shank available on request.

Hardwood Cone

Highly-compressed hard wood laminated in layers with plastic. The grain direction is perpendicular to the circumference to assure uniform lapping surface and efficient charging. They are recommended for fast stock removal or where exact contour or shaping is required.

Space Heaters

The GRY-15HD heater provides cost effective spot and space heating for an extensive variety of applications. The series of direct fired combustion diesel and kerosene heaters are primarily designed for drying in buildings and for heating of medium to large premises. The direct heater requires continuous ventilation for indoor use.

Features include:
Compact design.
Functions on diesel or kerosene.
15 kW heater.
Ideal for drying and heating.
Very easy to operate.
Safety switch preventing overheating.
Rotary air compressor.
Suitable for outdoor use.
Comes with handle.

Picture for illustration only, not supplied with wheeled base.

GRY-15 HD Space Heater

GRY 15 HD
Thermal power: 15kW
Motor power: 100W
Voltage: 230V ~ 50Hz
kcal/h: 12,900
Btu/h: 51,600
Airflow (m3/h): 350
Airflow (cfm): 206.5
Fuel consumption: 1.48ltr/h
Tank capacity: 11ltr

York? Diamond Coated Burrs

3mm shank. Overall length 45mm. Diamond grip mesh is 120/140. Recommended operating speeds 15,000 30,000 RPM. Suitable for precision grinding of carbide, gems, ceramics, tough alloys, cermets, tool steels etc.

Cylindrical Ball Nosed

York? Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Conical

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Bosch Straight Die Grinders

GGS 16
The most powerful model from Bosch with collet clamping. Powerful 900-watt motor. Suitable for all grinder tools with shank diameter of 6, 8, 10 mm and 1/4". Particularly precise true running due to collet clamping. Heat-insulating handle sleeve for good guidance. Lock-off switch prevents inadvertent activation. Cut-out carbon brushes. Good handling, also for left-handers.

Specifications:
No load speed: 16.000rpm.
Toolholder collets up to 10mm diameter.
Rated power input: 900W.
Weight: 3kg.

Available in 240V and 110V.

Engis Hyprez Oilstones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Hyprez R.G. Medium Silicon Carbide

This stone is a mainstay, designed for general use. Length: 150mm.

Hetty General Purpose Cleaner

Cable rewind/storage system. Triple 3-stage filtration system to hospital standards. High efficiency 'Turboflo' power head. Four wheel 'Tracking' mobility with big wheel stability. Suction: 2450mm. Capacity: 9 litres. Cleaning Range: 23.2m. Size: 340 x 340 x 370mm



Supplied with Kit A1.300mm Combination Floor Nozzle
240mm Crevice Tool
2.4m Nuflex Threaded Hose
Stainless Steel Tube Bend with Volume Control
2x Stainless Steel Extension Tube
Double Taper Hose/Tool Adapter
65mm Soft Dusting Brush
150mm Upholstery Nozzle
150mm Slide on Brush for Upholstery Nozzle