190mm (7,1/2") Circular Saw

Depth setting, switch-on lock & spindle lock. Accessories include: TCT blade, guide and blade spanner. Blade size: 190mm x 30mm bore. No load speed: 4,100rpm. Power input: 1,200W. Maximum cutting capacities: at 90° 65mm, at 45° 43mm. Available in 110V and 240V.

GKS65

York? High Performance Flap Discs

High performance alternative to sanding discs. Have the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. Overlapped abrasive strips slowly wear away revealing fresh abrasive, ensuring the disc always cuts effectively, reducing clogging, provides constant finish throughout disc life, generates less noise and heat - less blueing. No backing pads needed - fits directly onto machine. Safe to use at 80m/s on any grinder. Tested at 150m/s and approved by the German Grinding Wheel Authority (DSA).

Zirconium Grade Aluminium Backed (For Stainless Steel)

115mm Dia x 22mm Bore 13,300 MOS (rpm).

Star Spray Gun Accessories

Set of No. 4 Baffles & No. 7 Cup Gaskets
Weight: 10g

Baffles and Gaskets

York? Non Woven Abrasive Roll

Non-woven roll for cleaning, blending and finishing applications.

Maroon - X-Fine

Size: 150mm x 10m.

Kennedy® Scythe Stones

Aluminium Oxide man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.

Flat Tapered

A general-purpose sharpening stone for agricultural and horticultural tools such as hoes, spades, edgers, clippers and shears.

Kemet Diamond Compounds

Kemet Diamond Compounds are formulated and manufactured to the highest standards. The KD formula ensures a stable carrier is provided, which gives the fastest cutting and polishing action. Type W (water) and OS (oil) lubricants can be used to extend the life of the compound. Kemet Diamond Compound is suitable for lapping and polishing most materials including Steels, Carbides and Ceramics.

Lapping & Pre-Polishing

Impact Drill

High-performance impact drill with high torque for the most heavy-duty applications with large diameters (drilling, working with core cutters and holesaws), screwdriving and stirring. Single-sleeve keyless chuck with Auto-Lock for quick accessory changes with only one hand.

No load speed: 900/3000rpm
Impact rate: 15300/51000bpm
Torque (Nm): 40/14.5
Drilling capacities: wood 40mm concrete 24mm, steel 16mm
Weight: 2.9kg

Kennedy® Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

York? Flat Reinforced Cutting Discs

Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatability. Not to be used for wet cutting.

Type 41

Grade C24. For use on stone and non-ferrous materials.

SIA Fibre Discs

4819
Tough durable Zirconia grain with grinding aid to reduce heat build up and glazing. Strong fibre backing to give maximum grain support on arduous applications. Excellent life and cut to reduce down time and consumable costs, ideal for mild and stainless steel applications. Available in a choice of grades and in diameters of 100mm, 115mm, 127mm or 180mm.

115mm Diameter x 22mm Bore (Max 11,000rpm)