Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.

Rotabroach Mini Cutters

For perfect holes in sheet metal, pipes & plastic. Cut clean, burr-free holes in seconds with new Roatabroach Mini-Cutters, the professional solution to holemaking in sheet metal, pipes and plastics. Mini-Cutters produce holes by removing a 'disc' of metal and have precision ground teeth and flutes to rapidly remove waste material, so they are fast, smooth and highly accurate. Now they come with a new and more aggressive tooth geometry to give high higher performance and longer cutting life on stainless steel and other difficult materials. No toolbox is complete without Mini-Cutters for clean, precise and effortless holecutting every time. Over 3 times faster than twist drills Mini-Cutters have multiple teeth and an annular
cutting action with no 'dead centre' area as with a twist drill. It means that less pressure is required to make the hole, so there is less risk of deforming sheet metal. This highly efficient cutting action also ensures minimal burring on breakthrough, reducing or completely eliminating the need for additional finishing work. Last up to 300 times longer than hole saws Holesaws have stamped teeth which only remove
small particles of metal with each revolution whereas Mini-Cutters are precision ground cutting instruments which slice their way through sheet metal without leaving burrs or jagged edges. Because they are made from M2 High Speed Steel,
they retain their sharpness to give a longer, more reliable cutting life over thousands of holes.

Trend Router Cutters

General purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two Flute Straight Plunging Bits

1/4" and 1/2" Shanks

3M Stikit® Discs 338U

Aluminium oxide paper. For general purpose sanding. Fre-Cut coating inhibits premature loading to give a longer lasting product, particularly in fine grades. Features the 3M Stikit self-adhesive fastening system to ensure sheets remain firmly attached to Stikit accessories while in use. All general purpose sanding applications by hand or using portable sanding machines.
Use on: Wood, Paint/Lacquer, Fillers, Metal.
Mineral: Aluminium Oxide.
Backing: C-weight Paper.
Coating: Open.
Bond: Resin Over Glue.

Kobe? High Speed Mini Die Grinder

GD2806L
For precision engineer?s mould making etc. Safety lever throttle, front exhaust, ultra compact and lightweight.

Specifications:
Free speed: 25,000rpm.
Collet size: 6mm.
Air inlet thread: 1/4?? NPT.
Air hose size (ID): 10mm.
Air pressure: 90PSI.
Air consumption: 4CFM*.
Noise level: 94dB(A).
Sound power level: 103dB(A).
Vibration: 5.0m/s.
Overall length: 120mm.

*Based on a 15 second cycle per minute average use.

Kennedy® Router Cutters

With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.

Two Flute Flush Trimming Bits

Osaki™ Generators

The GTS800 generator from Osaki™ is suitable for DIY, & hobby use for running small power tools, freezers lights etc.

Features include:
5.8 Hour running time from a 4.2Ltr fuel tank.
800W peak power, 650W continuous.
12V battery charging outlet supplied with lead and clamps.
13 Amp outlet socket.
Overload circuit breakers.
Anti-vibration feet.
Smooth running 2-stroke.
2hp easy start engine.
Maintenance free brushless alternator.

GTS800 800W 2 Stroke Petrol Generator

Specifications:
Engine: 2 stroke.
Easy-start recoil: 2.0hp.
Displacement: 63cc.
Fuel - oil ratio: 50-1.
AC output: 230V - 50Hz.
Max. output (peak power): 800W.
Continuous power: 650W.
DC output: 12V - 8.3A.
Sound power level: 87.3dB(A).
Sound pressure: 66.4dB(A).
Protection: IP54.
Overall size: 365x360x330mm (HxWxD).
Running time on full tank: 5.8hrs.
Weight: 20.5kg.

FOR DIY USE, Not Warranted for Industrial Use.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 3mm

Shape W149. Grade: RA120. Diameter: 4mm. Length: 6mm. Max. rpm: 100,000. Weight per 10: 20g.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Round Tree

Cut 3 - Rapid Cut
For use on softer non-ferrous and plastic materials i.e. aluminium, fibreglass, plastics, hard rubber and zinc alloy.

York Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Operating speed range: 6000-40000rpm.

Ball Shape

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.