Adcola Replacement Soldering Tips

Currie type No.8 (425C). Additional Curie types are available upon application: Curie type 6 (325C). Curie type 7 (375C). Curie type 9 (475C)

Tips Suitable For Weller Tools - Adiron Tips For P.T. series.

Safety Stands

For "K" series soldering irons. Cast alloy rubber base - 125 x 76 x 25mm and spring length - 100mm. Supplied with sponge. S1. For use with K1000, K2000 & K4000 series.S2. For use with K3000 series.

Adcola Replacement Soldering Tips

For XS & X25 Series.

Tips Suitable For Antex Tools - Adiron Tips

Adcola Replacement Soldering Tips

For XS & X25 Series.

Tips Suitable For Antex Tools - Adiron Tips

Soldering Irons

Designed for use on printed circuit boards and micro-electric soldering SMD and generally in the electronics industry. Lightweight design with a shim retained tip to prevent seizure. The K series iron is designed so that an efficient heat flow is maintained to the tip, while the handle stays cool.

K1000

Rated 380C (700F). Tip diameter 4.75mm (3/16"). Supplied with 5937 Adiron tip. Wattage Equivalent: 15.

Adcola Replacement Soldering Tips

For use with K2000, K4000, 101, 151 & 444.

Adiron Soldering Tips

Adcola Replacement Soldering Tips

For XS & X25 Series.

Tips Suitable For Antex Tools - Adiron Tips

Adcola Replacement Soldering Tips

For use with K2000, K4000, 101, 151 & 444.

Adiron Soldering Tips

Fume Hood

Designed for extracting fumes from work area by passing them through a carbon sponge filter. The unit has built in lighting controlled from an individual switch. Lightweight metal construction which clamps to desired work top or table. Fully adjustable both in height and reach. Voltage: 220/230V. Maximum height: 530mm. Maximum reach: 515mm.

Adcola Soldering Irons

The K212-3 12 volt AC/DC Soldering Iron is supplied complete with tip, a suspension hook and four metres of cable fitted as standard with cigar lighter plug, battery clips and cigar lighter socket.

The Adcola K212-3 soldering iron kit is suitable for use soldering components onto printed circuit boards, micro-electric soldering SMD and general use in the electronics industry.

The lightweight design with a shim retained tip to prevent seizure and the K series iron is so that an efficient heat flow is maintained to the tip, while the handle stays cool.

K212-3 12V Low Voltage Soldering Iron Kit

K212-3 specification:
Rated 400°C to 420°C (750°F to 790°F).
Tip diameter 4.75mm (3/16'').
Supplied with 4057 Adiron tip.
K2240A/S Iron is fitted with an antistatic handle and 5036 copper tip.
Wattage equivalent: 25.