Q-Torq Torque Calibration Analysers

Clear easy to use scales. Specifically designed to set and calibrate most makes of torque tools. Mechanism is totally enclosed in a die cast aluminium housing. Repeatable accuracy to plus/minus 2% of reading. Memory pointer and built-in needle shock absorber. Single direction mechanism for clockwise use. The preferred and certified ranges of these torque calibration analysers meet the specified measuring range as detailed in ISO 6789 : 2003.

QCA 400

Torque range:
ISO 0.8 - 4cNm.
Inch 7.2 - 36lbf.in.
Scale sub divisions:
0.05Nm, 0.5lbf.in.

QCA 2500 model illustrated.

Quick-Set Torque Drivers

Micrometer style adjustment allows easy accurate setting. Slipping action at pre-set torque eliminates over-tightening. The adjustment ring automatically disengages when the tool is in use to prevent accidental adjustment. Stainless steel shafts. Anodised aluminium handles. Suitable for electrical, electronics and instrument assembly works. Manufactured to ISO 6789:1992



Torque Range: 1-6 Nm

For further specification on this product please see the attached PDF under the catalogue PDF links tab.

Q-Torq Torque Calibration Analysers

Clear easy to use scales. Specifically designed to set and calibrate most makes of torque tools. Mechanism is totally enclosed in a die cast aluminium housing. Repeatable accuracy to plus/minus 2% of reading. Memory pointer and built-in needle shock absorber. Single direction mechanism for clockwise use. The preferred and certified ranges of these torque calibration analysers meet the specified measuring range as detailed in ISO 6789 : 2003.

QCA 130

Torque range:
ISO 26 - 130cNm.
Inch 36 - 180ozf.in.
Scale sub divisions:
2cNm, 2ozft/in.

QCA 2500 model illustrated.

Quick-Set Torque Drivers

Micrometer style adjustment allows easy accurate setting. Slipping action at pre-set torque eliminates over-tightening. The adjustment ring automatically disengages when the tool is in use to prevent accidental adjustment. Stainless steel shafts. Anodised aluminium handles. Suitable for electrical, electronics and instrument assembly works. Manufactured to ISO 6789:1992



Torque Range: 5-50 Ibf.in

For further specification on this product please see the attached PDF under the catalogue PDF links tab.

Standard 1/4 " A/F Female hexagon socket Torque Limiting Screwdriver

1/4 " A/F Female hexagon socket which will accept screwdriver bits. Can be converted to a Male end by using the appropriate adaptor. Can be pre-set to any torque value within range by using a Torque Calibration Analyser. Can be fitted with 'Impact Free Resetting' option. Range: 6-406cNm. 8ozf.in - 36lbf.in.
Overall length: 200mm.
Weight: 300g.

Dial Indicating Torque Wrenches

Ideal for use in inspection and quality control, research and development, production and after sales service. Lightweight aluminium handles, abrasive resistant bodies for longer life and easy read dual scale for observing the amount of torque applied throughout the tightening process. Socket not included. Manufactured to ISO 6789 : 1992.

3/8" Square Drive

Torque Range: 5-25Nm 48-240ibf.in

For further specification on this product please see the attached PDF under the additional information tab.

Dial Indicating Torque Drivers

Can indicate torque in two ways - measures and displays torque as it is applied, or measures and displays the maximum torque used, after it has been applied. Ideal for the electronics, electrical and domestic appliance industries. Stainless steel shafts coloured aluminium handles and scaled nylon dials. 1/4" Hex drive. Dual scale. Manufactured to ISO6789:1992.

Minor Type

Torque Range: 20-100 cNm 28-140 ozf.in

For further specification on this product please see the attached PDF under the catalogue PDF links tab.

1/4" Square Drive Slipper Wrenches

Micrometer style fine adjustment with positive locking system. Automatic resetting with audible click when the wrench slips. Accurate repeatability. Aircraft specification stainless steel heads, aluminium handles. Designed to operate in any environment from the toughest engineering production line to fine finish assembly areas.



Torque Range: 2-10 Nm

For further specification on this product please see the attached PDF under the catalogue PDF links tab.

TPW25 1/4" Production Slipper Torque Wrench

Wrench 'slips' when predetermined torque setting is reached, completely eliminating overtightening. Fitted with Mechanical Torque Adjustment Locking Device. Accurate repeatability guarantees equal tightness every time. Incorporates a specially designed multi-lobed cam which automatically resets the wrench after a small movement of the handle, allowing quick progress to the next operation. Incorporates a fully supported ratchet giving smooth, positive torque control, even in confined spaces. Lightweight for less operator fatigue. Range: Nm 3-25. ibf.ft 2-18. Overall length: 216mm (8.5") Weight: 340g (0.75lb). Ratchet: 1/4".

Q-Torq Torque Calibration Analysers

Clear easy to use scales. Specifically designed to set and calibrate most makes of torque tools. Mechanism is totally enclosed in a die cast aluminium housing. Repeatable accuracy to plus/minus 2% of reading. Memory pointer and built-in needle shock absorber. Single direction mechanism for clockwise use. The preferred and certified ranges of these torque calibration analysers meet the specified measuring range as detailed in ISO 6789 : 2003.

QCA 1200

Torque range:
ISO 2.4 - 12cNm.
Inch 24 - 120lbf.in.
Scale sub divisions:
0.2Nm, 2lbf.in.

QCA 2500 model illustrated.