1/2 & 3/8'' Square Drive Professional Torque Wrench - Industrial Ratchet Models

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).



The professional torque wrench offers an ideal combination of accuracy, robust construction, comfort and ease of use. The push-through ratchets on these models are robustly engineered for strength and durability. The strength and high wear resistance comes from the design of the tooth pattern while the principle of offset ratchet pawls gives a narrow engagement angle. Accuracy of +/-3% of reading exceeds all international standards for torque wrenches. Every wrench is supplied with a calibration certificate to satisfy the requirements of ISO 9000-2000. Soft feel handle provides excellent grip even in oily conditions. Handle material and lens resist all chemicals in common automotive, industrial and aviation uses. Locking mechanism prevents accidental adjustment of the wrench during operation. Long scale graduated in Nm and lb/ft allows for foolproof and accurate setting, kgf/m and lbf/in scales are also available. Supplied in moulded box for storage and protection.

Torque Range: 8-60Nm 5-45ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

16mm Spigot End Fittings

Metric

Flare End

16mm Spigot

Fixed Square Drive Heads.

1/4", 3/8" Square Drive "P" Type, Ratchet Head (Pre-set)

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



Accuracy exceeds all international standards. Traceable calibration certificate supplied to satisfy ISO 9000 quality systems. High quality 72 tooth ratchet allows use in confined spaces. Torque Handle versions, both 16mm spigot and 9 x 12mm female. Unmistakable signal when set torque is reached. With reversible ratchets. "P" Type versions designed to discourage unauthorised alteration.

Torque Range: 1-20Nm 10-180ibf.in

For further specification on this product please see the attached PDF under the additional information tab.

1/4", 3/8" Square Drive "P" Type, Ratchet Head (Pre-set)

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



Accuracy exceeds all international standards. Traceable calibration certificate supplied to satisfy ISO 9000 quality systems. High quality 72 tooth ratchet allows use in confined spaces. Torque Handle versions, both 16mm spigot and 9 x 12mm female. Unmistakable signal when set torque is reached. With reversible ratchets. "P" Type versions designed to discourage unauthorised alteration.

Torque Range: 1-20Nm 10-180ibf.in

For further specification on this product please see the attached PDF under the additional information tab.

16mm Spigot End Fittings

Metric

Flare End

16mm Spigot End Fittings

Inch

Open End

22mm Spigot End Fittings

Metric

Ring End

16mm Spigot End Fittings

Inch

Flare End

Highwayman Torque Multiplier

The 'Highwayman' torque multiplier has been designed for general purpose use where it is necessary to provide higher torque than would otherwise be possible, due to limitations on space or operator strength.Input to the multiplier is via a ratchet torque wrench (not supplied) set to one fifth of the desired output. This 5:1 torque multiplication is accurate to more than +/-4%. Supplied in kit form that includes a multiplier head, cranked reaction bar, straight reaction bar, and carrying case. Model 17220 also comes complete with spare square drive lug. Robust construction ensures long life with minimal maintenance.



Torque Range: 2700Nm 2000 Ibf.ft
Square Drive: 3/4" Input 1" Output

For further specification on this product please see the attached PDF under the catalogue PDF links tab.