1" Square Drive Industrial Adjustable Ratchet

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



Robust construction gives accurate results to +/-4%. Back break action indicates when specified torque has been achieved and improves accuracy by reducing the possibility of over tightening. With calibration certificate fully traceable and suitable for ISO 9000 assessment purposes. With ratchet.

Torque Range: 300-1000Nm 200-750ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

16mm Spigot

Reversible Ratchet Head.

16mm Spigot End Fittings

Metric

Flare End

1/4", 3/8" Square Drive Adjustable Ratchet Fixed Head (Push Through)

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



72 tooth fine ratchet mechanism which allows use in confined areas. Incorporating "click" sound and "snap" feel to indicate when torque setting has been reached. Knurled disc on the ratchet head to reverse ratchet direction. Clear plastic handle protects the scale from accidental damage. Torque setting can be altered by rotating the adjustment lever at the base of the wrench. Pre-set "P" type versions available to eliminate the torque setting being altered on the production line. Fixed head version has push square drive for instant direction reversal. All with ratchet except 11125 which is non-ratchet.

Torque Range: 4-20Nm 40-180ibf.in

For further specification on this product please see the attached PDF under the additional information tab.

16mm Spigot End Fittings

Metric

Flare End

22mm Spigot Professional Adjustable

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



For heavy duty applications (torque exceeding 300 N.m.) that require a spanner fitting rather than a socket (i.e. hydraulic and pneumatic pipe fittings). Robust construction gives accurate results to +/-4%. 16mm diameter spigot for use with any 22mm diameter end fittings. With calibration certificate fully traceable and suitable for ISO9000 assessment purposes.

Torque Range: 110-550Nm 80-400ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

16mm Spigot End Fittings

Metric

Flare End

Norbar Torque Wrenches

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

1/2" Square Drive Professional Adjustable

Incorporates 'click' sound and 'snap' feel to indicate when torque setting has been reached. Sliding switch on the ratchet head for instant direction reversal (except model 300 and 330, which has a push through square drive). Setting lock to prevent accidental adjustment of the torque setting. Scale located within handle Nm/lbf.ft graduated (kgf.m or ibf.in scale also available, supplied to order). Accuracy to 3%. Supplied in sturdy blow moulded box for protection. Supplied with a traceable calibration certificate to satisfy the requirements of ISO 9000 quality systems. With ratchet.

Torque Range: 60-300Nm 45-220ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

1/2 & 3/8'' Square Drive Professional Torque Wrench - Industrial Ratchet Models

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).



The professional torque wrench offers an ideal combination of accuracy, robust construction, comfort and ease of use. The push-through ratchets on these models are robustly engineered for strength and durability. The strength and high wear resistance comes from the design of the tooth pattern while the principle of offset ratchet pawls gives a narrow engagement angle. Accuracy of +/-3% of reading exceeds all international standards for torque wrenches. Every wrench is supplied with a calibration certificate to satisfy the requirements of ISO 9000-2000. Soft feel handle provides excellent grip even in oily conditions. Handle material and lens resist all chemicals in common automotive, industrial and aviation uses. Locking mechanism prevents accidental adjustment of the wrench during operation. Long scale graduated in Nm and lb/ft allows for foolproof and accurate setting, kgf/m and lbf/in scales are also available. Supplied in moulded box for storage and protection.

Torque Range: 20-100Nm 15-80ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

1/4", 3/8" Square Drive "P" Type, Ratchet Head (Pre-set)

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



Accuracy exceeds all international standards. Traceable calibration certificate supplied to satisfy ISO 9000 quality systems. High quality 72 tooth ratchet allows use in confined spaces. Torque Handle versions, both 16mm spigot and 9 x 12mm female. Unmistakable signal when set torque is reached. With reversible ratchets. ?P? Type versions designed to discourage unauthorised alteration.

Torque Range: 4-20Nm 40-180ibf.in

For further specification on this product please see the attached PDF under the additional information tab.