16mm Spigot End Fittings

Metric

Flare End

1/4", 3/8" Square Drive "P" Type, Ratchet Head (Pre-set)

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



Accuracy exceeds all international standards. Traceable calibration certificate supplied to satisfy ISO 9000 quality systems. High quality 72 tooth ratchet allows use in confined spaces. Torque Handle versions, both 16mm spigot and 9 x 12mm female. Unmistakable signal when set torque is reached. With reversible ratchets. "P" Type versions designed to discourage unauthorised alteration.

Torque Range: 1-20Nm 10-180ibf.in

For further specification on this product please see the attached PDF under the additional information tab.

16mm Spigot End Fittings

Metric

Open End

16mm Spigot End Fittings

Metric

Flare End

3/4" Square Drive Industrial Adjustable Ratchet

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



Robust construction gives accurate results to +/-4%. Back break action indicates when specified torque has been achieved and improves accuracy by reducing the possibility of over tightening. With calibration certificate fully traceable and suitable for ISO 9000 assessment purposes. With ratchet.

Torque Range: 700-1500Nm 500-1000ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

Highwayman Torque Multiplier

The 'Highwayman' torque multiplier has been designed for general purpose use where it is necessary to provide higher torque than would otherwise be possible, due to limitations on space or operator strength.Input to the multiplier is via a ratchet torque wrench (not supplied) set to one fifth of the desired output. This 5:1 torque multiplication is accurate to more than +/-4%. Supplied in kit form that includes a multiplier head, cranked reaction bar, straight reaction bar, and carrying case. Model 17220 also comes complete with spare square drive lug. Robust construction ensures long life with minimal maintenance.



Torque Range: 1300Nm 960Ibf.ft
Square Drive: 1/2'' Input 3/4'' Output

For further specification on this product please see the attached PDF under the catalogue PDF links tab.

16mm Spigot End Fittings

Metric

Flare End

16mm Spigot End Fittings

Metric

Flare End

1" Square Drive Industrial Adjustable Ratchet

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



Robust construction gives accurate results to +/-4%. Back break action indicates when specified torque has been achieved and improves accuracy by reducing the possibility of over tightening. With calibration certificate fully traceable and suitable for ISO 9000 assessment purposes. With ratchet.

Torque Range: 700-1000Nm 500-1000ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

Norbar Torque Wrenches

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

16mm Spigot 'P' Type (Pre-set)

Designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a Torque Wrench Analyser or similar instrument. Setting system is designed to discourage unauthorised alteration. Coloured end seals are provided to identify the wrench to a particular operator, torque setting or calibration period.

Torque Range: 30-300Nm 22-220ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.