Norbar Torque Wrenches

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

1/2" Square Drive 'P' Type Ratchet (Pre-set)

Designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a Torque Wrench Analyser or similar instrument. Setting system is designed to discourage unauthorised alteration. Coloured end seals are provided to identify the wrench to a particular operator, torque setting or calibration period. With reversible ratchets.

Torque Range: 8-60Nm 5-45ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

Norbar Torque Wrenches

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

1/2" Square Drive Professional Adjustable

Incorporates 'click' sound and 'snap' feel to indicate when torque setting has been reached. Sliding switch on the ratchet head for instant direction reversal (except model 300 and 330, which has a push through square drive). Setting lock to prevent accidental adjustment of the torque setting. Scale located within handle Nm/lbf.ft graduated (kgf.m or ibf.in scale also available, supplied to order). Accuracy to 3%. Supplied in sturdy blow moulded box for protection. Supplied with a traceable calibration certificate to satisfy the requirements of ISO 9000 quality systems. With ratchet.

Torque Range: 40-200Nm 30-150ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

16mm Spigot End Fittings

Inch

Open End

Norbar Torque Wrenches

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

1/2" Square Drive Professional Adjustable

Incorporates 'click' sound and 'snap' feel to indicate when torque setting has been reached. Sliding switch on the ratchet head for instant direction reversal (except model 300 and 330, which has a push through square drive). Setting lock to prevent accidental adjustment of the torque setting. Scale located within handle Nm/lbf.ft graduated (kgf.m or ibf.in scale also available, supplied to order). Accuracy to 3%. Supplied in sturdy blow moulded box for protection. Supplied with a traceable calibration certificate to satisfy the requirements of ISO 9000 quality systems. With ratchet.

Torque Range: 20-100Nm 15-80ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

Norbar Torque Wrenches

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

16mm Spigot Professional Adjustable

For applications that require a spanner fitting rather than a socket (i.e. hydraulic and pipe fittings). Robust construction gives accurate results to /- 4%. 16mm diameter spigot for use with any 16mm diameter end fittings. With calibration certificate fully traceable and suitable for ISO9000 assessment purposes.

Torque Range: 40-200Nm 30-150ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

1" Square Drive Professional Adjustable Ratchet

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



Incorporates "click" sound and "snap" feel to indicate when torque setting has been reached. Non length dependant. Extension handle can be used to reduce operator effort (extension handle supplied as standard with models 800, 1000 and 1500). Fine 60 tooth ratchet allows the wrench to be used in confined areas. Accuracy of +/-3%. *Weight does not include extension handle. Extension handle specification, Length: 700mm, Weight: 1.6kg.

Torque range: 200-800Nm 150-600ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

16mm Spigot End Fittings

Metric

Flare End

Norbar Torque Wrenches

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

16mm Spigot Professional Adjustable

For applications that require a spanner fitting rather than a socket (i.e. hydraulic and pipe fittings). Robust construction gives accurate results to +/-4%. 16mm diameter spigot for use with any 16mm diameter end fittings. With calibration certificate fully traceable and suitable for ISO9000 assessment purposes.

Torque Range: 8-60Nm 5-45ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

16mm Spigot End Fittings

Metric

Flare End

16mm Spigot End Fittings

Metric

Open End