Monument Lead Dressers

734D
Specially designed for use on beating sheet lead, copper, zinc, aluminium etc. onto flat surfaces. Made from high density hardwood with sufficient lift to clear the user's knuckles.
Size: 320mm (13").
Weight: 340g.

Monument Setting-in Sticks

748U
For similar work as bending sticks, with a more acute curve. Designed for flashing work. Made from high density hardwood.
Size: 340mm (13.1/2").
Weight: 270g.

L-Type Radiator Spanners

Manufactured from high tensile steel, zinc plated.
2053U: For use on 3/8" and 10mm radiator vent plugs and bleed screws.
2054X: For use as a valve spanner and air release key (with one round end - push pin).

Adjustable Basin Wrench

Tightens and loosens nuts in particularly awkward positions such as under basins and behind pipes. Handle manufactured from solid steel with removable tommy bar. Hardened serrated steel head and jaws. The spare jaw can be stored on the handle.
Capacity 10 - 32mm (3/8" - 1,1/4").

L-Type Radiator Spanners

Manufactured from high tensile steel, zinc plated.
2053U: For use on 3/8" and 10mm radiator vent plugs and bleed screws.
2054X: For use as a valve spanner and air release key (with one round end - push pin).

Shetack Basin Wrench

Manufactured from malleable iron. Suitable for fitting back nuts and union nuts for taps behind basins, sinks and baths.

Gas Test Gauge Manometer

Made from tough plastic, used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances. Marked in millibars the scale adjusts to zero the water level. Extruded cover slides off and may be clipped over the base for standing the tool vertically during use. Hanging tab permits vertical hanging from suitable protrusion.

258F

600mm long, 60 millibar capacity.

Monument Tools Pipe Cutters

Using a pipe cutter rather than a hacksaw while installing new pipe work avoids swarf entering the system, which may cause problems or damage when system is used.

Copper Pipe Cutters
Rigid construction suitable for use in confined spaces. Large feed screw with fluted handle for accurate adjustment of cutter depth. The cutter is manufactured from hardened and tempered steel. Three different capacity cutters are available.

266E

Capacity: 12.7 - 44mm. Weight: 458g. Supplied with spare cutter in the fluted handle.

Sink Waste Cleaner

Suitable for unblocking domestic waste pipes including: sinks, baths and showers. All galvanised steel for resistance to rust. 2m body with gripping handle. Corkscrew end is for dislodging and moving any obstructions.

Bending Springs for Copper Pipes

Provides internal support to the copper pipe being bent to prevent kinking. Manufactured from spring steel with polished finish.

Internal