Monument Tools Pipe Cutters

Using a pipe cutter rather than a hacksaw while installing new pipe work avoids swarf entering the system, which may cause problems or damage when system is used.

Copper Pipe Cutters
Rigid construction suitable for use in confined spaces. Large feed screw with fluted handle for accurate adjustment of cutter depth. The cutter is manufactured from hardened and tempered steel. Three different capacity cutters are available.

266E

Capacity: 12.7 - 44mm. Weight: 458g. Supplied with spare cutter in the fluted handle.

Monument Tools Pipe Cutters

Using a pipe cutter rather than a hacksaw while installing new pipe work avoids swarf entering the system, which may cause problems or damage when system is used.

Copper Pipe Cutters
Rigid construction suitable for use in confined spaces. Large feed screw with fluted handle for accurate adjustment of cutter depth. The cutter is manufactured from hardened and tempered steel. Three different capacity cutters are available.

265B

Capacity: 4 - 28mm. Weight: 350g. Supplied with spare cutter in the fluted handle.

Gas Test Gauge Manometer

Made from tough plastic, used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances. Marked in millibars the scale adjusts to zero the water level. Extruded cover slides off and may be clipped over the base for standing the tool vertically during use. Hanging tab permits vertical hanging from suitable protrusion.

257C

300mm long, 30 millibar capacity.

L-Type Radiator Spanners

Manufactured from high tensile steel, zinc plated.
2053U: For use on 3/8" and 10mm radiator vent plugs and bleed screws.
2054X: For use as a valve spanner and air release key (with one round end - push pin).

Gas Test Gauge Manometer

Made from tough plastic, used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances. Marked in millibars the scale adjusts to zero the water level. Extruded cover slides off and may be clipped over the base for standing the tool vertically during use. Hanging tab permits vertical hanging from suitable protrusion.

258F

600mm long, 60 millibar capacity.

Monument Tools Manhole Lifting Keys

Heavy-duty manhole cover lifting keys with rectangular shaped end and triangular handle. Zinc plated. Supplied in pairs. Handle width: 100mm. Available in 4 lengths: 150, 300, 500 and 600mm.

500mm

Monument Tools White Tallow

Used as a lubricant when threading or pulling electrical cables through conduit etc. Available in small, medium and large sizes.

Medium 500g Tub

Monument Tools Manhole Lifting Keys

Heavy-duty manhole cover lifting keys with rectangular shaped end and triangular handle. Zinc plated. Supplied in pairs. Handle width: 100mm. Available in 4 lengths: 150, 300, 500 and 600mm.

300mm

Bending Springs for Copper Pipes

Provides external support to the copper pipe being bent to prevent kinking. Manufactured from spring steel.

External

L-Type Radiator Spanners

Manufactured from high tensile steel, zinc plated.
2053U: For use on 3/8" and 10mm radiator vent plugs and bleed screws.
2054X: For use as a valve spanner and air release key (with one round end - push pin).