Monument Setting-in Sticks

748U
For similar work as bending sticks, with a more acute curve. Designed for flashing work. Made from high density hardwood.
Size: 340mm (13.1/2").
Weight: 270g.

Monument Tools Manhole Lifting Keys

Heavy-duty manhole cover lifting keys with rectangular shaped end and triangular handle. Zinc plated. Supplied in pairs. Handle width: 100mm. Available in 4 lengths: 150, 300, 500 and 600mm.

300mm

Toilet Plunger

Suitable for toilets and gulleys. Unique patented bellows design offers more displacement force than traditional plungers.

Monument Tools Adjustable Tank Cutter

68C
High carbon steel drill with adjustable steel cutter. 8mm hexagon shank suitable for use in drill chucks. The cutting blade length is easily adjusted using a screwdriver. Suitable for cutting holes in sheets of unhardened material up to 2mm thick. Capacity: 34 x 125mm. Weight: 132g.

Gas Test Gauge Manometer

Made from tough plastic, used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances. Marked in millibars the scale adjusts to zero the water level. Extruded cover slides off and may be clipped over the base for standing the tool vertically during use. Hanging tab permits vertical hanging from suitable protrusion.

258F

600mm long, 60 millibar capacity.

Monument Tools Tap Reseating Set

Tool fits 1/2" and 3/4" in BS1010 new series and BS5412 flat and bevelled seats, six cutters and two double bushes in set.
Cutters:
Flat: 11/16" and 3/4", 17mm and 19mm.
Flat: 13/16" and 1", 20mm and 25mm.
Bevelled: 11/16" and 13/16", 17mm and 20mm.
Fits old series 1/2" and 3/4" BS1010 flat seats, four cutters and two tapered cones in set.
Cutters:
11/16", 3/4", 13/16" and 1", 17, 19, 20 and 25mm.

Gas Test Gauge Manometer

Made from tough plastic, used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances. Marked in millibars the scale adjusts to zero the water level. Extruded cover slides off and may be clipped over the base for standing the tool vertically during use. Hanging tab permits vertical hanging from suitable protrusion.

257C

300mm long, 30 millibar capacity.

Bending Springs for Copper Pipes

Provides internal support to the copper pipe being bent to prevent kinking. Manufactured from spring steel with polished finish.

Internal