Monument Tools Pipe Cutters

Using a pipe cutter rather than a hacksaw while installing new pipe work avoids swarf entering the system, which may cause problems or damage when system is used.

Copper Pipe Cutters
Rigid construction suitable for use in confined spaces. Large feed screw with fluted handle for accurate adjustment of cutter depth. The cutter is manufactured from hardened and tempered steel. Three different capacity cutters are available.

265B

Capacity: 4 - 28mm. Weight: 350g. Supplied with spare cutter in the fluted handle.

Monument Tools Soldering/Brazing Mats

Prevents burn damage to the surrounding area when soldering. Resistant to temperatures up to 600°C and does not present any of the hazards associated with asbestos materials. Available in 2 sizes: 250 x 250mm and 300 x 300mm.

Monument Tools Pipe Cutters

Using a pipe cutter rather than a hacksaw while installing new pipe work avoids swarf entering the system, which may cause problems or damage when system is used.

Copper Pipe Cutters
Rigid construction suitable for use in confined spaces. Large feed screw with fluted handle for accurate adjustment of cutter depth. The cutter is manufactured from hardened and tempered steel. Three different capacity cutters are available.

264Y

Capacity: 3-22mm. Weight: 170g.

Kennedy Stopcock Keys (Crutch Type)

For turning stopcocks on and off. Turning handle has one chisel end for lifting covers. Black painted finish.

Kennedy Stopcock Key

Length: 1060mm.

L-Type Radiator Spanners

Manufactured from high tensile steel, zinc plated.
2053U: For use on 3/8" and 10mm radiator vent plugs and bleed screws.
2054X: For use as a valve spanner and air release key (with one round end - push pin).

Drain Unblocker

Suitable for unblocking domestic drains including: sinks, baths, showers and other small diameter pipes. The spring is housed within the container to avoid contact with clean surfaces. Corkscrew spring end is for dislodging and moving any obstructions.
Spring size: 6mm x 8m.

Compression Nut Spanner

Compression nut spanner single ended drop forged. 28mm (39mm A/F) to suit most 28mm compression nuts. Length 290mm.

2039C

Monument Tools White Tallow

Used as a lubricant when threading or pulling electrical cables through conduit etc. Available in small, medium and large sizes.

Medium 500g Tub

Replacement Cutter Wheels

273A: for Copper, Brass & Aluminium.
284I: for Stainless Steel.

To fit Monument Pipe Cutters:
264Y (MON-588-0264Y)
265B (MON-588-0265B)
266E (MON-588-0266E)

Monument Setting-in Sticks

748U
For similar work as bending sticks, with a more acute curve. Designed for flashing work. Made from high density hardwood.
Size: 340mm (13.1/2").
Weight: 270g.