Drain Unblocker

Suitable for unblocking domestic drains including: sinks, baths, showers and other small diameter pipes. The spring is housed within the container to avoid contact with clean surfaces. Corkscrew spring end is for dislodging and moving any obstructions.
Spring size: 6mm x 8m.

Bending Springs for Copper Pipes

Provides internal support to the copper pipe being bent to prevent kinking. Manufactured from spring steel with polished finish.

Internal

Monument Tools Automatic Copper Pipe Cutter

For work in confined spaces. Strongly made outer zinc coated metal body houses the inside mechanism made from steel which takes the load of the cut. Cuts copper pipes once the gate of the tool is closed over the pipe. Tool can be rotated in either direction. Available in 3 types: 15, 22 and 28mm capacities.

Monument Tools White Tallow

Used as a lubricant when threading or pulling electrical cables through conduit etc. Available in small, medium and large sizes.

Medium 500g Tub

Monument Tools Soldering/Brazing Mats

Prevents burn damage to the surrounding area when soldering. Resistant to temperatures up to 600°C and does not present any of the hazards associated with asbestos materials. Available in 2 sizes: 250 x 250mm and 300 x 300mm.

Handy Plunger

For removing hidden obstructions from pipework using air suction.

Pump Nut Spanner

52mm. Steel tool works on most nuts next to domestic circulating pumps. 400mm long.

2040G

Monument Tools Adjustable Tank Cutter

68C
High carbon steel drill with adjustable steel cutter. 8mm hexagon shank suitable for use in drill chucks. The cutting blade length is easily adjusted using a screwdriver. Suitable for cutting holes in sheets of unhardened material up to 2mm thick. Capacity: 34 x 125mm. Weight: 132g.

Gas Test Gauge Manometer

Made from tough plastic, used both for testing pipework installations with air for leaks before the introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliances. Marked in millibars the scale adjusts to zero the water level. Extruded cover slides off and may be clipped over the base for standing the tool vertically during use. Hanging tab permits vertical hanging from suitable protrusion.

257C

300mm long, 30 millibar capacity.

Monument Tools Manhole Cover Lifting Keys

Tee handle. 125mm (5") 'D' shaped end, malleable iron keys. Used to lift manhole covers for inspection or repair to sewers. Supplied in pairs.