SOLENT Maintenance Welders Anti-Spatter Fluid - 5 Litres

Reduces the risk of joint puddling and greatly reduces preparation time prior to final painting. Does not affect any subsequent galvanising or painting operations. Evaporates under normal weld temperatures. Dichloromethane and silicone-free. Non-flammable, non-toxic, non-corrosive and biodegradable.
Dimensions (W x D x H): 185 x 135 x 283mm.
Weight: 5kg.

WD40SP 3-In-One Original Multi-Purpose Oil With PTFE

Lubricates and cleans. Protective PTFE formula.

Rotary Shaft Seals

Rotary Shaft Seals are used in a wide range of applications and are excellent for sealing high speed rotating shafts. We offer a complete range of metric and inch sizes with various sealing lip styles and materials. Used in conjunction with the shaft repair kits can improve the overall sealing efficiency of the application.

Single Lip Plus Wiper Lip Type

Ambersil Silicone Mould Release Agents

Easy and economical to use, enhances surface finishes on mouldings and increases output by reducing rejects. Operational up to 200C.

One/2 Heavy duty

For difficult mouldings.

Ever Build General Purpose C3 Silicone

C3 Silicone. Multi-purpose acetoxy cure silicone sealant that cures quickly to provide a permanently flexible, high strength waterproof seal. It contains a powerful anti-fungicide to prevent mould growth. Sealing around worktops, laminates baths, showers, basins and other sanitary ware, etc.

Markel Paint Markers

Markel Paint Markers are custom designed for a wide range of cold to hot applications. Available in 5 types.

Type B: All purpose cold surface marker which has the widest spread of applications. Timber, brick, metal surfaces and rubber. Temp marking range 45C to 65C. Available in blue, black, brown, green, orange, pink, purple, red, white and yellow.

Type H: Yellow hot surface marker for applications like colour coding foundry rises and runners and non-ferrous metals whilst hot, coils, billets, bars, ingots etc. Temp marking range 65C to 650C.

Type K: White - marks extremely hot rough surfaces, castings, forgings, ingots, billets without burning or running off. Temp marking range 760C to 1200C.

Type P: White - for marking steel prior to galvanising process. Marks are completely removed in the pickling bath and will not interfere with galvanising process. Temp marking range 45C to 65C.

Type HT: Red - hot metal surfaces eg steel blooms, bars, coils of strip etc. The mark is highly visible on metals, castings, coils etc. it must be stored outside. Temp marking range 120C to 870C.

WD40SP Fast Drying Degreaser

Cleans equipment to make it run smoother and last longer. Works immediately on contact. Easy to rinse and leaves no residue. Cleans away oil, grease, dirt and grime. Can be used on a variety of surfaces, including metal.

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

Hammerite Paint

Forms a tough barrier which repels moisture and provides long lasting protection. Corrosion resistant with a high gloss colour retention. Can be applied directly onto rusty metal - no need for a primer or undercoat, (just use a wire brush to remove loose paint etc. ensuring to leave a dry dirt free surface). Supplied in 250ml, 500ml, 1ltr, 2.5ltr and 5ltr tins or 400ml aerosol. Typical: Brush 4.5sq metres per 400ml can.

Smooth Finish - Tins

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings