Salvage Container

Where a drum is damaged or leaking UN transport regulations require that it is transported in a leak proof container. This container fully meets these regulations. The 100% polyethylene construction ensures compatibility to a broad band of chemicals and oils. The lid is fully threaded and can be tightened using a bar or piece of timber across the slots. The moulded design externally allows for lifting by a fork-lift or sling.
L x W x H (cm): 81 dia x 105
Sump (ltrs): 360

SSD-360

Ultrawave Q Series Ultrasonic Benchtop Cleaning Baths

The Q-Series from Ultrawave combines new technology with ease of operation and a modern design to reinvent ultrasonic cleaning. Medical, laboratory and other industry professionals can now command excellent, repeatable and traceable cleaning results from the Q-Series of ultrasonic bench-top cleaners. Available in 7 capacities: 2.5, 3.75, 4.5, 9.5, 12.5, 17,5 and 25 litre models.

Reduced dead spots and minimal standing waves increase ultrasonic activity.
More homogenous cavitational activity throughout the tank means a more consistent cleaning action.
Improved instrument and component cleaning cycle after cycle.
Faster, more effective cleaning results.
All this means consistently cleaner instruments in a quicker cycle time.

Q-Series models are supplied with the following features as standard:
Basket and lid/drip tray.
Digital control panel.
Heated 0 - 80C.
Frequency leap technology.
Timer (0 - 99 mins).
Drain outlet.
SD card slot for digital validation.

Hammerite Paint

Forms a tough barrier which repels moisture and provides long lasting protection. Corrosion resistant with a high gloss colour retention. Can be applied directly onto rusty metal - no need for a primer or undercoat, (just use a wire brush to remove loose paint etc. ensuring to leave a dry dirt free surface). Supplied in 250ml, 500ml, 1ltr, 2.5ltr and 5ltr tins or 400ml aerosol. Typical: Brush 4.5sq metres per 400ml can.

Smooth Finish - Tins

Clog Free Spray Paint

Ideal base for all automotive top coats. Dries fast, easy to use.

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

Molyslip AS40 Anti-Scuff Paste MOL15005

Gelled lubricating oil which contains molybdenum disulphide and graphite together with advanced corrosion inhibitors.
Assembly compound which ensures bedding-in without scuffing or scoring. 40% molybdenum disulphide plus graphite and corrosion inhibitors. Extreme high load capabilities.

Markel Paint Markers

Markel Paint Markers are custom designed for a wide range of cold to hot applications. Available in 5 types.

Type B: All purpose cold surface marker which has the widest spread of applications. Timber, brick, metal surfaces and rubber. Temp marking range 45C to 65C. Available in blue, black, brown, green, orange, pink, purple, red, white and yellow.

Type H: Yellow hot surface marker for applications like colour coding foundry rises and runners and non-ferrous metals whilst hot, coils, billets, bars, ingots etc. Temp marking range 65C to 650C.

Type K: White - marks extremely hot rough surfaces, castings, forgings, ingots, billets without burning or running off. Temp marking range 760C to 1200C.

Type P: White - for marking steel prior to galvanising process. Marks are completely removed in the pickling bath and will not interfere with galvanising process. Temp marking range 45C to 65C.

Type HT: Red - hot metal surfaces eg steel blooms, bars, coils of strip etc. The mark is highly visible on metals, castings, coils etc. it must be stored outside. Temp marking range 120C to 870C.

Bostik High Performance Neoprene Adhesive - 2402

Two part adhesive ideal for rubber such as inflatables or wet suits. Use 9252 primer when bonding rubber to metal.

LPS® Tapmatic TriCut Cutting Fluid

Features:
Excellent for stainless steel and other hard to machine metals
Not recommended for aluminum
Provides smooth, accurate cutting action
Flows directly to cutting edge
Extends tool life
Improves surface finish
Allows increased removal rates
Reduces friction
Suitable for high and low speed applications
Non-corrosive to steel

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings