Rotary Shaft Seals

Rotary Shaft Seals are used in a wide range of applications and are excellent for sealing high speed rotating shafts. We offer a complete range of metric and inch sizes with various sealing lip styles and materials. Used in conjunction with the shaft repair kits can improve the overall sealing efficiency of the application.

Single Lip Plus Wiper Lip Type

7200 - Chisel Aerosol

Removes all types of old gasket in minutes. No scraping, grinding or heating.

Artists Spray Adhesives

Non-permanent adhesive for use with artwork, photographs etc. Allows for repositioning. Improved spray pattern for reduced overspray and easier application.

Spray Mount?

Enamel Paint

This tough enamel has long lasting flexibility when used to cover rust, bare metal and wood, repelling moisture to give long term protection. It must be applied in temperatures of 5 C or above and is sag resistant to eliminate brush strokes, dilutable by white spirit and can be used for interior or exterior applications.

Packing Extractors

With Hardened and tempered steel screws, designed to give maximum penetration into gland material and flexible shafts for removal of packing of any size, even in difficult positions. Type "TRACC" have and integral tip corkscrew tip, type "TRACR" have replaceable tips for extended life.

Type TRACR - Replaceable Tip

Heavy Duty Anti-rust protection spray

Solent Heavy Duty Anti-Rust Protection Spray is supplied in a large 500ml aerosol. It is a high performance corrosion inhibitor. The product is sprayed directly onto the surface to be protected. Clear in colour with a faint yellow trace to identify treated surfaces. The film has self healing properties and is easily removed with solvent cleaners. The coating will resist moisture, acid and alkali fumes. The film does not contain Silicone or Halogens. Corrosion protection periods vary with environmental conditions. Typical interior protection in the UK in excess of 2 years. Product can be re-applied should conditions require it.

PCB Takpak

382 is a one component, fast curing high viscosity cyanoacrylate adhesive designed to be used with TAK PAK accelerators to produce instant cures.
20 gram bottle.

382

Rotary Shaft Seals

Rotary Shaft Seals are used in a wide range of applications and are excellent for sealing high speed rotating shafts. We offer a complete range of metric and inch sizes with various sealing lip styles and materials. Used in conjunction with the shaft repair kits can improve the overall sealing efficiency of the application.

Single Lip Plus Wiper Lip Type

So-Cool "Plus" Syn General

Fully synthetic formulation. Long working life therefore economical. Minimises wheel glazing. Effective corrosion resistance. Stable emulsions in soft and hard water. Does not contain PTBBA.

Recommended concentration for general machining operations:
Grinding Cast iron 2 % to 3.5% or (a dilution of 50 to 1 or 30 to 1).
Steel and Ni/Cr steel 2% or (a dilution of 50 to 1).

Available in grade SC-GS.
Supplied in 20 litre stacking poly container.

Markel Paint Markers

Markel Paint Markers are custom designed for a wide range of cold to hot applications. Available in 5 types.

Type B: All purpose cold surface marker which has the widest spread of applications. Timber, brick, metal surfaces and rubber. Temp marking range 45C to 65C. Available in blue, black, brown, green, orange, pink, purple, red, white and yellow.

Type H: Yellow hot surface marker for applications like colour coding foundry rises and runners and non-ferrous metals whilst hot, coils, billets, bars, ingots etc. Temp marking range 65C to 650C.

Type K: White - marks extremely hot rough surfaces, castings, forgings, ingots, billets without burning or running off. Temp marking range 760C to 1200C.

Type P: White - for marking steel prior to galvanising process. Marks are completely removed in the pickling bath and will not interfere with galvanising process. Temp marking range 45C to 65C.

Type HT: Red - hot metal surfaces eg steel blooms, bars, coils of strip etc. The mark is highly visible on metals, castings, coils etc. it must be stored outside. Temp marking range 120C to 870C.