Wet Surface Repair Putty (UW)

High-exothermic, non-rusting epoxy putty for use in wet environments and underwater. Bonds securely to steel, iron, aluminium, brass, bronze, concrete, wood and plastics. Max Operating Temperature: 93C. Pot Life: 45 minutes. Mix Ratio: 1.40:1.

Tramp Oil Belt Skimmers

Overall length: 440mm (from top of bracket to bottom of belt)
Maximum insertion depth: 150mm.
Case dimension (L x W x D): 80 x 80 x 502mm.



Designed to effectively and simply remove tramp oil floating on the surface of cutting fluid. Prevents the 'Monday morning smell', extends coolant life and reduces the risk of dermatitis. Compact units fit to the side or above the tank. 240V. Supplied with plug.

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

Flex Oil

perma Flex oil Synthetic high-temperature chain oil for textile and plastic processing machines.



SO14 - High Performance Oil
• Good regeneration effect on used oil.
• Outstanding penetration properties.
• Good adhesion, no throwing off.

Solent? Absorbent Rolls

Many applications for absorbents can be met by making use of one or more of these rolls. Make a selection from medium weight 50cm or 90cm wide, or lightweight 50cm x 80m long. All sizes and weights are perforated for economy of use.



Oil-only/Medium Duty
Size: 90cm x 40m
Absorbs (ltrs): 144

Castrol Hysol T15 Cutting Oil

Formulated to ensure exceptional steel cutting characteristics. Can be used on a variety of other metals including stainless steel. The product has a natural tendency to reject tramp oil which overcomes problems associated with its ingress into soluble cutting fluids.

T15 Cutting Oil

Available in 20ltr and 208ltr.

Kennedy Caulking Guns

Industrial, robust and easy to use. Suitable for use with standard 310ml cartridges of sealant, filler or adhesive.

Solent® Maintenance Sprays and Lubricants

You can rely on Solent? Maintenance for lubrication, flaw detection, automotive detergents, grease, anti seize compounds all are formulated from the highest quality ingredients to stringent manufacturing standards.

DW25 De-Ionised Water

Solent? Maintenance DW25 de-ionised water can be used in lead-acid car batteries, it is also suitable for domestic appliances such as steam irons and steam cleaners, avoids problems caused by scaling. It can also be used as a final rinse in car washing to avoid ?spotting? and is also suitable for rinsing scientific glassware.

De-ionised water, when first produced has a neutral pH level of 5.5. The pH level changes as carbon dioxide from the air dissolves in the water and forms carbonic acid (H2CO3). Boiling the water will remove the carbon dioxide and restore the neutral pH.

Supplied in 25Ltr drum.

Industrial Paint Markers

Designed for countless metal marking applications. Can be used for marking greasy, rusty, or new metal surfaces Also suitable for marking glass, plastic, wood, ceramics etc. Ballpoint nozzle cap will only allow ink flow when applied and pressed to the workpiece - ink cannot be spilt from the cap unintentionally. One head can be interchanged from differing inks and bottles. Can be refilled from 1 litre bulk refills of the specially formulated ink.

Solent® Maintenance Sprays and Lubricants

Solent® Maintenance Sprays and Lubricants are a comprehensive range of products for use in the workshop and the office.

SZ1-500B Cold Zinc Galvanising Spray

Solent® SZ1-500B Cold Zinc Galvanising Spray provides fast drying corrosion protection and once dry will match the colour of newly galvanised metal. Ideal for protecting welded joints in galvanised structures. Can be used as a topcoat or primer. Compatible with most paint finishes. Contains no CFC's or lead. Fitted with directional spray button designed to assist application in outdoor locations with minimum over-spray.

Manufactured and tested to:
ASTM B117 (Hot Salt Spray)
BS AU 148:PT14 1969 (Natural Weathering)
DIN EN ISO 12944-1 (Corrosion Protection of Steel Structures)

500ml aerosol.