LPS® A-151 Solvent Degreaser

This high flash point solvent penetrates quickly removing oil, grease, corrosion inhibiting compounds and other contaminants. A-151 has a flash point of 175°F (79°C) which allows it to be used in areas where flammability poses a potential problem. A-151 is also ideal for dip tanks. It does not contain any chlorinated solvents and is safe to use on most surfaces. NSF C1 registration 059811: (aerosol); 059812: (bulk).

Brasso Wadding

For brass, copper, chrome, steel and other metals.

Image not available for 175ml

Isopon P38 Polyester Filler (Two Part)

Chemical paste for filling rust holes and dents in steel, glass fibre etc. Can be sanded after only 20 minutes and painted over with most paint systems.

"DIY" Size Kits

Plastic Steel Putty (A)

Steel filler. Bonds to metals, concrete, and some plastics. Resistant to rust, oil, petrol, water and chemicals. Machinable. Max Operating Temperature: 121C. Pot Life: 45 minutes. Mix Ratio: 9.0:1.

Rotary Shaft Seals

Rotary Shaft Seals are used in a wide range of applications and are excellent for sealing high speed rotating shafts. We offer a complete range of metric and imperial sizes with various sealing lip styles and materials. Used in conjuction with the shaft repair kits can improve the overall sealing efficiency of the application.

Single Lip Type

Paint Markers

Permanent and waterproof on all non-absorbent surfaces, gives sharp glossy finish with medium bullet tip.

Circular Drum Tray

Where there is only one drum in use in an area, the Oil Storage Regulations state that a drum tray with a capacity that is 25% of the size of the drum is sufficient. This 100% polyethylene circular tray meets the requirement. It is also ideal as a temporary bund for smaller items during maintenance operations, including batteries.
L x W x H (cm): 87 diameter x 19
Sump (ltrs): 50
(drum and lid not included).

SOT-8

Pan Fibre Gland Packing

Composite construction of PAN fibres combined with pure carbon fibres. Self-lubricating with superior packing properties - enhanced by graphite impregnation and high temperature lubricants, practically eliminates shaft scoring. Conformable packing, with a square, inter-braid, lattice construction, which improves sealing with less gland pressure.
Applications: Suitable for most plant applications and able to replace and outperform traditional graphited asbestos, glass fibre and natural fibre packing.
Suitable for use against oils, water,
steam, solvents and general chemicals.
Operational limits
Pressure rating: 80bar
Rotary speed: 10m/s
Temperature: -50C + 250C
pH range: 4-12
Roll length: 8m

Type VG2

Everbuild 200 Contractors LMA Silicone

Contract grade acetoxy cure silicone sealant. For general glazing, weatherproofing, sanitary and gap sealing applications. Quick curing, mould resistant.

200TR

uni POSCA Marker

The POSCA water based marker produces opaque, vibrant colours that write on Metal, Paper, Plastic, Glass and Fabric. Widely recognised within the artistic community as being perfect for creating unique designs and extensively utilised and recommended within the Automotive industry. Water based pigment ink allows creation of an endless palette. Thanks to the vivid opaque pigment ink, POSCA guarantees a professional finish every time. Valve system ensures ink will not dry out when cap is left out. POSCA is rain resistant but can be washed off when necessary. Recommended in the automotive industry due to ink not containing lead or cadmium. No smell, contains no alcohol no solvent and will not bleed through paper. Environmentally friendly product

Medium Bullet Tip - PC5M