Markel Paint Markers

Markel Paint Markers are custom designed for a wide range of cold to hot applications. Available in 5 types.

Type B: All purpose cold surface marker which has the widest spread of applications. Timber, brick, metal surfaces and rubber. Temp marking range 45C to 65C. Available in blue, black, brown, green, orange, pink, purple, red, white and yellow.

Type H: Yellow hot surface marker for applications like colour coding foundry rises and runners and non-ferrous metals whilst hot, coils, billets, bars, ingots etc. Temp marking range 65C to 650C.

Type K: White - marks extremely hot rough surfaces, castings, forgings, ingots, billets without burning or running off. Temp marking range 760C to 1200C.

Type P: White - for marking steel prior to galvanising process. Marks are completely removed in the pickling bath and will not interfere with galvanising process. Temp marking range 45C to 65C.

Type HT: Red - hot metal surfaces eg steel blooms, bars, coils of strip etc. The mark is highly visible on metals, castings, coils etc. it must be stored outside. Temp marking range 120C to 870C.

Hardener (H3840/S)

For use with FastGlas Resin illustrated (ISO-750-2016R).
(Resin not included).

Metal Primer

An industrial primer which protects and seals all bare surfaces providing a perfect finish without the need for sanding. Formulated using special anti-corrosive properties which form an impenetrable barrier against moisture and increase the durability of the top coat.

British Standard 'O' Rings

NBR70 Rubber 'O' Rings
The most common and simplest types of seal with excellent sealing properties and durability.
Used in engines and gearboxes, also found in anything from
shower heads to an aircraft, garden hoses and pumps etc.,
They can be used as face to face gasket style
seals or as shaft seals and allow both rotary and
linear movement. They have a 70 Shore hardness
and an operating temperature range of -30C to
120C. Highly resistant to many chemicals,
petroleum, diesel, LPG etc.
All sizes to BS1806
Many other sizes and
materials in stock.

NBR70 Rubber 'O' Rings

Ambersil Non Silicone Mould Release Agent

The non silicone formula will not interfere with post moulding treatments such as bonding,

Seven/2 Heavy duty

Heavy duty film for the release of plastic and rubber mouldings. Operational up to 170C.

Araldite 2014 - High Chemical and Temperature Resistance Epoxy Paste

Gap filling properties. Non sagging up to 5 mm thickness. Low out gassing/volatile loss. Temperature resistant to 120 deg C. Ideal for metals, electronic components, GRP structures etc. Light handling strength at 3 1/2 hours.

Janitol Spray & Wipe

A dirty working environment causes potential hazards that can be avoided. There is a legal responsibility on the employer to meet the Management of Health at Work Regulations 1999. When choosing the right product, follow this simple 3-Step product selector:SOILING - Identify type and degree of soiling to be removed. SURFACE - Ensure the type of surface to be cleaned. ENVIRONMENT - Understand the implications on the environment in which the cleaning is required.



Fact acting sanitiser rapidly kills a wide range of bacteria (after 10 seconds contact time). Removes light oil and fat deposits leaving surfaces clean. Contains no perfume to taint food.

Foliac Manganese P.J.C.

Designed for where there is a need for stronger joints to be made, resistant to higher temperatures and pressures. Dries harder than graphite compounds.

Q8 Machine Tool Lubricant

Dynobear. Advanced multi-purpose range of oils for lubrication of machine tools and general machinery. Also recommended for medium-duty hydraulic systems and gearboxes.

Rotary Shaft Seals

Rotary Shaft Seals are used in a wide range of applications and are excellent for sealing high speed rotating shafts. We offer a complete range of metric and inch sizes with various sealing lip styles and materials. Used in conjunction with the shaft repair kits can improve the overall sealing efficiency of the application.

Single Lip Plus Wiper Lip Type