Industrial Paint Markers

Designed for countless metal marking applications. Can be used for marking greasy, rusty, or new metal surfaces Also suitable for marking glass, plastic, wood, ceramics etc. Ballpoint nozzle cap will only allow ink flow when applied and pressed to the workpiece - ink cannot be spilt from the cap unintentionally. One head can be interchanged from differing inks and bottles. Can be refilled from 1 litre bulk refills of the specially formulated ink.

Cerasit Acrylic Sealant & Filler

121
Fast curing, very durable, mould resistant and permanently flexible. Easy to apply and can be painted after one hour. Suitable for interior sealing of doors, window frames, filling cracks in walls and ceilings, baths and showers. Size: 310ml. Colour: white.

Ambersil Mould Cleaner 5L

Cleaner for Mould Tools and Dies. Quickly and easily removes oil, grease, old protective films, silicone and non-silicone based release agents. Evaporates to leave a clean, dry surface with no residues. Special formulation permits use on hot production tooling without excessive solvent loss by evaporation.
Size: 5L.

N.B. Picture illustrates 400ml aerosol.

Ceresit Silicone Sealants

3E
Acetoxy Silicone. Good adhesion and extrusion and is fast curing. Can be used for weather sealing, bonding shop windows, display cases signs, boat maintenance and sealing of electrical conduits. Size: 310ml. Available in aluminium, black, bronze, brown, grey, clear and white.

Molyslip FMG EP Food Machinery Grease

Suitable for Commercial & Industrial Applications
Approved for use where incidental contact with foodstuffs may occur.
Specially compounded from U.S. FDA listed, acceptable ingredients and NSF H1 registered. It meets USDA, 1998 H1 guidelines for the lubrication and protection of machinery used for the processing and packaging foodstuffs.
Non-melt, non-toxic, waterproof, high performance E.P. grease.
The special properties of FMG make it suitable for a wide range of applications including anti-friction bearings, slides, gears and guides etc.

Hammerite Paint

Forms a tough barrier which repels moisture and provides long lasting protection. Corrosion resistant with a high gloss colour retention. Can be applied directly onto rusty metal - no need for a primer or undercoat, (just use a wire brush to remove loose paint etc. ensuring to leave a dry dirt free surface). Supplied in 250ml, 500ml, 1ltr, 2.5ltr and 5ltr tins or 400ml aerosol. Typical: Brush 4.5sq metres per 400ml can.

Smooth Finish - Tins

Double IBC Spill Pallet

This is the largest polyethylene spill pallet available, and can be used for a variety of applications including the regulation compliant storage of two 1000 litre IBCs or up to eight 205 litre drums. The strong polyethylene rotationally moulded design ensures that there is no distortion of the side walls when under load.
L x W x H (cm): 256 x 135 x 51
Sump (ltrs): 1140

SSP114

Ambersil Non Silicone Mould Release Agent

The non silicone formula will not interfere with post moulding treatments such as bonding,

Five/2 Light duty

Dry film for release of fine detail plastic and rubber mouldings. Operational up to 150C.

Instant Adhesive

A high viscosity ethyl cyanoacrylate adhesive for general- purpose bonding of rubber, plastic and metal. Replaces 415, 416 and 422.

431 - High Viscosity

Bostik General Purpose Adhesive - 1782

Used by toy, leather goods and PVC ware manufacturers.