542 Hydraulic Sealant

Medium strength, medium viscosity. Impervious to all common hydraulic fluids including fire resistant synthetics. Will not clog valves or fine filters. Replaces tapes, pastes and self-sealing compression joints.
Recommended for threaded fittings as used in hydraulic and pneumatic installations.
Medium threadlocking strength.
Suitable for high pressure systems.
Temperature range: -55C to 150C

Clog Free Spray Paint

Ideal base for all automotive top coats. Dries fast, easy to use.

Shaft Repair Sleeves

Quickly and economically repair grooved and worn shafts for rotary oil seals. Fitting new seals on already worn shafts can result in repeat replacement of the seals. Grooving wear on a shaft can require expensive re-machining or even result in the shaft having to be replaced. Repair sleeves are simply pushed over the worn running surface. No special equipment is required - a standard depth installation tool is supplied with the sleeve. A mallet and a pair of pliers are all that are required for the repair job. The surface is machined without directionality, wear resistant often a better finish than that of the original shaft.

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

120ltr 2-Wheeled Poly Bin Spill Kits

Contents:
75 x pads.
9 x socks.
8 x pillows.
10 x disposal bags.

HT70 High Temperature Grease

Synthetic lubricant which evaporates slowly without carbonising to leave a thin film of Molybdenum disulphide. For use on slow running plain and anti-friction bearings subjected to high temperatures. Temperature range: plus 180C to plus 300C.

Artline 400XF Paint Markers

Special permanent pigment ink. Valve controlled ink flow with a stroke width of 2 - 4mm. Opaque and weatherproof. Available in black, blue, green, red, white and yellow (singles). White and yellow also available in packs of 12.

Silicone Release

For integral skin and elastomeric polyurethanes. Silicone release system. Ultra fine spray pattern. Fast evaporating solvent carrier. Imparts a high gloss finish to moulded parts. Does not build up in the mould. Effective to 200°C.

Image not available for 25ltr

Plasti-Coll X10 Gas Jointing Compound

Originally developed to meet the requirements of the liquified petroleum industry for fitting pipes and has been used for years in the assembly and installation of appliances that use natural gas, bottled propane or butane. Reddish brown in colour. Temperature resistant -40C to 200C. Conforms to BS695: Parts 5 & 6 Type 'A' : 1992

Ambersil Bioweld Weld Anti-Spatter

Water based spatter release agent which gives exceptional results with no harmful solvents, silicones or mineral oils. Odourless, non-flammable and safe in use. Fine spray ensures total control and economical coverage. Prevents spatter adhesion on welding equipment, work pieces, surfaces, jigs and surrounding areas. Film is easily wiped away and leaves no residues. Allows post welding operations, painting, plating, galvanising etc to be undertaken without
interference. Contains a rust inhibiting agent.

Activators for Thread & Gasket Sealants

7649N - Recommended for use when a very fast cure is required. 7471T - Recommended for use at below 15C or on inactive surfaces.