Castrol Metal Cutting Lubricants

A fully synthetic soluble cutting fluid, intended for grinding ferrous metals. Has excellent health and safety characteristics, containing no mineral oil, phenols or sodium nitrite. Combines outstanding grinding characteristics with good operator acceptability and wide application in general machining. In general grinding operations, it permits a high surface finish to be achieved while ensuring long wheel life. It has good anti-corrosion properties in soft and hard waters and is compatible with all metals.

Syntilo™ 22 Fully Synthetic Soluble Cutting Fluid - 20ltr

Molycote 111 Valve Lubricant & Sealant

Molycote 111 Valve lubricant and sealant provides lubrication for control and pressure plug valves, water softener and tap valves. An ideal sealant for vacuum and pressure systems and also for outdoor equipment subject to washing and harsh environmental exposure ie: Meters, Electrical Service Entrances and underground connections. Chemical barrier coating gives good resistance to most chemicals.
Features;
Wide temperature range -40C to 200C.
Low vapour pressure.
Low volatility.
Excellent water resistance.

Markel Paint Markers

Markel Paint Markers are custom designed for a wide range of cold to hot applications. Available in 5 types.

Type B: All purpose cold surface marker which has the widest spread of applications. Timber, brick, metal surfaces and rubber. Temp marking range 45C to 65C. Available in blue, black, brown, green, orange, pink, purple, red, white and yellow.

Type H: Yellow hot surface marker for applications like colour coding foundry rises and runners and non-ferrous metals whilst hot, coils, billets, bars, ingots etc. Temp marking range 65C to 650C.

Type K: White - marks extremely hot rough surfaces, castings, forgings, ingots, billets without burning or running off. Temp marking range 760C to 1200C.

Type P: White - for marking steel prior to galvanising process. Marks are completely removed in the pickling bath and will not interfere with galvanising process. Temp marking range 45C to 65C.

Type HT: Red - hot metal surfaces eg steel blooms, bars, coils of strip etc. The mark is highly visible on metals, castings, coils etc. it must be stored outside. Temp marking range 120C to 870C.

Hammerite Paint

Forms a tough barrier which repels moisture and provides long lasting protection. Corrosion resistant with a high gloss colour retention. Can be applied directly onto rusty metal - no need for a primer or undercoat, (just use a wire brush to remove loose paint etc. ensuring to leave a dry dirt free surface). Supplied in 250ml, 500ml, 1ltr, 2.5ltr and 5ltr tins or 400ml aerosol. Typical: Brush 4.5sq metres per 400ml can.

Smooth Finish - Aerosol

Copper Spray Grease

Thick copper spray grease, perfect for anti-seize lubrication of screw threads, brake pins, studs and all types of fixings. Effective to 1100C. Lead free. Waterproof. CFC-free.

CS90

528 Contact Adhesive

A general-purpose one part polychloroprene rubber/resin contact adhesive which has a high initial grab with an excellent final bond strength and a good temperature resistance. Used for bonding decorative and rigid laminated plastic sheets of PVC of ABS to wood, wood composite boards and metals. Also bonds rigid plastic nosings and covings. Can be used on suspended or vertical flat surfaces. Available in 500ml, 1, 2.5 or 5 litre tins. Also available as Thixotropic (TX), which is faster curing and of a thicker consistency.

Solent? Spill Response Kits

There are many situations where there is a need for a permanent supply of absorbents to be on hand. Solent Plus spill kits are a cost-effective answer to this requirement. Available in Maintenance, Oil-only and Chemical kits, they range in capacity from 10ltrs up to 240ltrs. They are packed with sufficient absorbents to cope with a spill up to the size shown.

50ltr Vinyl Holdall Spill Kit

Contents:
35 x pads.
3 x socks.
3 x pillows.
5 x disposal bags.

Loctite SuperFlex Silicone Sealants

Provides a solid rubber seal directly from a tube. Will not sag or slump during applications. Can be used to produce gasket seals up to 6mm thick. For use with all common engineering materials.

Araldite 2012 - Multi Purpose Epoxy - Very Fast Cure

Room temperature curing, high strength and peel strength. Multi purpose, versatile with rapid cure. Ideal for Ferrous metals, aluminium, copper, zinc and galvanised metal, rubbers and wood etc. Light handling 20 mins.

Rotary Shaft Seals

Rotary Shaft Seals are used in a wide range of applications and are excellent for sealing high speed rotating shafts. We offer a complete range of metric and imperial sizes with various sealing lip styles and materials. Used in conjuction with the shaft repair kits can improve the overall sealing efficiency of the application.

Single Lip Type