Rotabroach Mini Cutters

For perfect holes in sheet metal, pipes & plastic. Cut clean, burr-free holes in seconds with new Roatabroach Mini-Cutters, the professional solution to holemaking in sheet metal, pipes and plastics. Mini-Cutters produce holes by removing a 'disc' of metal and have precision ground teeth and flutes to rapidly remove waste material, so they are fast, smooth and highly accurate. Now they come with a new and more aggressive tooth geometry to give high higher performance and longer cutting life on stainless steel and other difficult materials. No toolbox is complete without Mini-Cutters for clean, precise and effortless holecutting every time. Over 3 times faster than twist drills Mini-Cutters have multiple teeth and an annular
cutting action with no 'dead centre' area as with a twist drill. It means that less pressure is required to make the hole, so there is less risk of deforming sheet metal. This highly efficient cutting action also ensures minimal burring on breakthrough, reducing or completely eliminating the need for additional finishing work. Last up to 300 times longer than hole saws Holesaws have stamped teeth which only remove
small particles of metal with each revolution whereas Mini-Cutters are precision ground cutting instruments which slice their way through sheet metal without leaving burrs or jagged edges. Because they are made from M2 High Speed Steel,
they retain their sharpness to give a longer, more reliable cutting life over thousands of holes.

3M Scotch-Brite Deburring Wheels DB-WL

Available in three different grades to cope with a range of deburring applications. Continuously exposes abrasive to the workpiece to produce a consistent finish throughout the life of the product. Will not undercut, gouge, or distort the workpiece. Silicon carbide, convolutely wound. Suitable for use on all metals.

3M 777F/707E File Belts

For grinding stainless, nickel alloy and titanium. 3M material bonded to a tough cloth backing. Incorporate a grinding aid to ensure long life and high cut rates on all metals. Can be used to blend scratches left by coated abrasive belts.



100mm Wide x 289mm Long.

3M Green Corps? Flexible Grinding Discs

A range of Green Corps? flexible grinding discs which provide a fast cut smooth finish on a variety of metals. They can offer substantially reduced levels of vibration when grinding. Ideal for weld grinding, de-scaling, heavy deburring and deflashing of flame cut parts. To be used with back-up pads.

Grinding Disc Kits

Contents: 20 Discs plus 2 Back Up Pads.

Hitachi 125mm (5") Angle Grinder

Powerful 1,200W motor with deadman switch for increased safety. Wear resistance of armature coil and excellent overload durability. Grinding wheel replacement is made easier with a spindle lock. Supplied with grinding disc, side handle and wrench. No load speed: 11,000rpm. Power input: 1200W. Wheel diameter: 125mm. Hole diameter: 22.2mm. Spindle thread: M14 x 2. Weight: 1.9kg. Supplied with grinding disc, side handle and wrench.

G13SE2

Cubitron™ Fibre Sanding Discs

Cubitron™ II Fibre Discs are made with revolutionary 3M precision shaped ceramic grain technology, engineered with ultra-sharp, fast-cutting points that wear evenly, run cool and optimize mineral breakdown to maximize disc life.
Get more productivity, throughput, disc life, comfort and grinding speed.

Kennedy® Mounted Points and Wheels

Suitable for portable die and straight hand grinders. All points are aluminium oxide with "rubenite" as standard for all general purpose grinding and deburring on steels and most metals. Silicon carbide grade (suitable for stone/non-ferrous grinding) available on request. Shank diameters are metric as listed below with inch sizes available on request. Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only.

'W' Shape. Shank Dia. 3mm

Shape W143. Grade: RA120. Diameter: 3mm. Length: 3mm. Max. rpm: 100,000. Weight per 10: 20g.

York? Abrasive Blocks

Rubber sanding blocks impregnated with abrasive. Remains abrasive throughout the block. For industrial sanding/cleaning components and surfaces.

Grey - Medium

120 Grit

Kennedy® Sharpening Stones

Aluminium Oxide man-made abrasive which is extremely tough enabling high speed penetration of high tensile materials without causing excessive fracturing. This resistance to fracturing makes it a versatile material suitable for general sharpening and honing applications.

3 Square Aluminium Oxide

A range of tough general-purpose sharpening stones able to give keen, even cutting edges on all straight edge cutting tools. Consistent and uniform cutting edges ensure fast cutting and longer tool life.

Plate Sockets

Wall mounting white plate socket can be used with surface moulded box or metal box.

Unswitched