NiMH Batteries - O-Type

2607335694 14.4V 3.0Ah GML24V/VCD, AL2422DC, AL2425DV, AL2450DV, AL2498FC

Kennedy® Spare Halogen Bulbs

Halogen. Suitable for use with all standard PIR lights mini-pod floodlights, tripod site lights etc.

Halogen Tube Bulbs

Norton? Aluminium Oxide Rolls

In a useful dispensing pack with a perforated edge to facilitate cutting to required size, these high quality aluminium oxide rolls are ideal for a range of hand-sanding jobs where greater flexibility is required.

Rolls

Roll size: (W)25mm x (L)25 Metres. Available in several grades.

Bosch Sabre Saw Blades

Application: thin sheet metal 0.7 - 3mm, pipes and profiles 5 - 100mm.
Tooth set: Bi-metal, side set and milled.
Length: 150mm.
Pitch: 1.0.
Product No. S922AF.

For Metal (Pack 5)

SIP Professional 2020SS Submersible Pump – Dirty Water

06819
Powerful dirty water pump with a stainless steel housing - durable and corrosion resistant.

Specifications:
Supply: 230v (13amp).
Motor: 750w.
Float switch: yes.
Max. pumping head: 8M.
Flow rate: 233 l/min.
Max. particle diameter: 35mm.
Cable length: 10M.
Weight: 7kg.

Kemet Gesswein Abrasive Stones

Manufactured from carefully graded abrasive particles, mixed with the appropriate bonding agents and fired in electric or gas ovens to produce a stone suitable for roughing out cavities and dies to commercial finishes.

Gesswein OT Semi-hard Aluminium Oxide.

Oil filled, this stone is designed to minimise loading. Length 150mm.

York? Drum Holders

Suitable for use with chucks/collets on all portable power and air tools. For use with spiral bound abrasive sanding bands. Self expanding when in use for a secure grip on the band. All shanks are 6mm except where marked * which has an 8mm shank.

York? Adhesive Backed Discs

Adhesive backed aluminium oxide paper discs requiring no tools to change the disc, when the abrasive becomes worn or a different grit is needed just peel off and apply a fresh disc, reducing machine downtime therefore increasing productivity.

Hole Pattern: 600A. 6 Hole

Diameter: 150mm.

3M 266L Hookit? Discs

Micron graded aluminum oxide resin bonded to a 3 mil polyester film backing. Open coat abrasive surface is coated with a dry lubricant to resist loading. Sold as discs & sheets with hook backing for attachment to loop faced back up pads. Easy to re-use.

Hole Pattern: 500A. 5 Hole.

Diameter: 125mm.

Kennedy® Carbide Burrs

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness. Operating speed range is 6000-40000rpm.

Cylindrical Plain End

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.