Bosch Sabre Saw Blades

All-purpose saw blade for metal.
Application: flexible flush cut for non-ferrous metal, metal pipes and profiles 3 - 8mm.
Blade: bi-metal, side set and milled.
Tooth pitch: 1.8.
Length: 228mm.
Product No. S1122BF.

For Metal (Pack 5)

Dronco Cutting Discs

The special line for craftsmen and industrial applications. Due to the fact that different materials impose different demands, DRONCO produces discs especially matching the respective material. Special types of corundum and bonds are combined to suit the task in hand. This optimises performance, extends service life, increases efficiency and reduces cutting time. Manufactured according to EN 12413. Complies to oSa regulations.

Dronco Inox Cutting Discs

Characteristics: Free of iron and sulphur. Requiring little effort, the special thin cutting disc is easy on man and machine. High cutting speed, long service life, hardly any burring. Field of Application: Normal steel and stainless steel, particularly suitable for sheet metal and thin-walled profiles. The standard disc used on tank farms and in tank construction. Max. operating speed: 13280 r.p.m

Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

Cordless Impact Driver - 18V

Heavy duty 18V cordless impact driver. Ideal for repetitive screwdriving or in areas where access is restricted. Strong canned brush DC-motor with optimum ventilation and a sturdy aluminium gear box with rubber protection ring.
DRILL BODY ONLY. (no batteries or charger supplied with this tool).

Specifications:
Torque: 155Nm
No load speed: 2800rpm
Impacts per minute: 3200
Screw diameters: M6-M20
Tool holder: 1/4"

1/2? Variable Speed Impact Wrench

Kennedy® M2 Multi-Tooth Milling Cutters

Proven value and success based upon the low energy required to cut more holes accurately with extended tool life. The cutter is designed to enable a faster feed rate with lower cutting resistance, resulting in consistency of finish and tolerance.

Long Series

Shank dia.: 19mm/3/4".
Depth of cut: 50mm.
Bore: 6mm.
Overall length: 85mm.

3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

Surface Conditioning Discs

Reinforced Scotch-Brite web designed for cleaning and finishing on all metals. Leaves a burr-free surface for painting and coating for removal of light rust, oxides and coatings.
Maximum rpm.25mm Discs = 25000rpm.
50mm Discs = 23000rpm.
75mm Discs = 18000rpm.

Kennedy® Jigsaw Blades

Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting in some metals lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw baseplate reducing the gap around the blade and reducing the splinter area. Another technique is to score a guide line on the wood creating a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

Straight Shank Suitable for Fein, Wolf and Kress. HCS - Heavy Duty (Pack 5)

Capacities: Steel 3.0 - 6.0mm, Aluminium 1.0 - 3.0mm, Plastics 6.0mm. Tooth pitch: 3.0. Effective length: 50mm. Wavy set teeth. Equivalent to Wolf 91485.

Space Heaters

The portable KID line provide a cost effective spot heating for a large variety of applications. The series of direct fired combustion gas heaters are suitable for heating small/medium premises and well ventilated workshops as well as drying in construction industry. Suitable for outdoor use.
Functions on propane gas (LPG). Heating output manually adjustable on KID 30 and larger models. Ideal for space heating. Safety switch preventing overheating. Double safety valve for shutting off gas supply.

KID 10 ME Space Heaters

KID 10 ME
Thermal power: 10kW
Electrical power: 50W
Voltage: 230V ~ 50Hz
kcal/h: 8,600
Btu/h: 34,400
Airflow (m3/h): 300
Airflow (cfm): 177
Gas pressure: 0.3bar
Gas consumption: 0.78kg/h

DMT Diamond Whetstones

DIA-SHARP Continuous diamond surface sharpening stones provide cutting edge performance and are recognized for their superior quality particular to all DMT products. They feature an uninterrupted diamond sharpening surface that allows users to quickly put a razor edge on small contact area and pointed tools. Ready-to-go 3" credit card size diamond sharpener with convenient vinyl color-coded carrying case. Fits easily in pocket or wallet. Size: 83 x 51 x 1mm.

Credit Card Diamond Sharpener