3M Roloc Disc Products

Designed for use on portable tools and featuring the convenient Roloc Twist-on, Twist-off fixing system.

777F Cloth Discs

High performance disc with ceramic Cubitron abrasive mineral for use on stainless steels.
Maximum rpm. 25mm discs = 25,000rpm.
38, 50 & 75mm discs = 20,000rpm.

Rotabroach Mini Cutters

For perfect holes in sheet metal, pipes & plastic. Cut clean, burr-free holes in seconds with new Roatabroach Mini-Cutters, the professional solution to holemaking in sheet metal, pipes and plastics. Mini-Cutters produce holes by removing a 'disc' of metal and have precision ground teeth and flutes to rapidly remove waste material, so they are fast, smooth and highly accurate. Now they come with a new and more aggressive tooth geometry to give high higher performance and longer cutting life on stainless steel and other difficult materials. No toolbox is complete without Mini-Cutters for clean, precise and effortless holecutting every time. Over 3 times faster than twist drills Mini-Cutters have multiple teeth and an annular
cutting action with no 'dead centre' area as with a twist drill. It means that less pressure is required to make the hole, so there is less risk of deforming sheet metal. This highly efficient cutting action also ensures minimal burring on breakthrough, reducing or completely eliminating the need for additional finishing work. Last up to 300 times longer than hole saws Holesaws have stamped teeth which only remove
small particles of metal with each revolution whereas Mini-Cutters are precision ground cutting instruments which slice their way through sheet metal without leaving burrs or jagged edges. Because they are made from M2 High Speed Steel,
they retain their sharpness to give a longer, more reliable cutting life over thousands of holes.

Edward High Capacity Vacuum Cleaner - 1000W

Cable rewind/storage system. Giant filter and 2-stage disposable filter bags. High efficiency 'Turboflo' power head. Four wheel 'Tracking' mobility with big wheel stability. Suction: 2450mm. Capacity: 15 litre. Cleaning Range: 23.2m. Size: 355 x 355 x 465mm

EVR-370

York? Surface Conditioning Discs

For removing grinding marks and scratches leaving a greatly improved surface finish.

Hook and Loop Backed

Norton Depressed Centre Reinforced Cutting & Grinding Discs

A range of discs for all angle-grinding of both metal (aluminium oxide) and stone (silicon carbide).

Engis Lapping Sticks

Length 150mm.

Softwood

Rasta Depressed Centre & Flat Profile Cutting & Grinding Discs

For use with all portable machines. Not to be used for freehand or wet grinding. Type 27 Depressed Centre Portable Grinding Discs. Type 42 Depressed Centre Portable Cut-Off Discs. Type 41 Flat Portable Cut-Off Discs.

Type 41 Flat General Purpose Metal A30T Cutting

For steel/stainless steel. Fast cutting. Long wheel life. Free of iron, sulphur and chlorine. Made of corundum. Box quantity 25.

Kennedy® In-line RCD

The in line RCD is wired directly into the cable between the appliance and a standard three pin 13A plug (follow the wiring diagram supplied).

Kennedy® Depressed Centre and Flat Reinforced Grinding Discs

All Kennedy Depressed Centre and Flat Reinforced Cutting wheels now carry the "oSa" (The Organisation for the Safety of Abrasives) mark of approval. "oSa" is an association of the world's leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. "oSa" marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

Type 41 Flat Reinforced Cutting

For use with all portable angle grinders. 180mm to 230mm discs can also be used on circular saws, and 300 to 350mm discs are for use with chop saws/cut-off machines, subject to bore compatability. Not to be used for wet cutting.
Grade A24 - For general purpose cutting on metals.
Grade C24 - For general purpose cutting on stone.

Kennedy® Bench Stones

Silicon Carbide man-made abrasive with very hard, sharp particles. This makes it ideal for non-ferrous metals, hard surfaces, alloys and cemented carbides. Also used on stone, marble, glass and plastics. A superior abrasive that is able to penetrate and cut quickly with only light pressure being applied.

Single Grit Silicon Carbide

For workshop use. Ideal for sharpening chisels, plain iron and virtually any metallic implements. Available in two types.