No.49 Planer Blades

To Suit PWE910 (PK-2)

235mm (9") Circular Saw

Max. Cut at 90: 85mm. Max. Cut at 45: 64mm. Blade Diameter: 235mm. Bore Diameter: 30mm. Input Wattage: 1,550w. No Load Speed: 4,500rpm. Net Weight 7.6kg. Accessories: carbide-tipped saw blade, rip fence (guide rule), hex wrench. Weight 7.6kg. Available in 110V and 240V.

5903RK

Kennedy® Depressed Centre and Flat Reinforced Grinding Discs

All Kennedy Depressed Centre and Flat Reinforced Cutting wheels now carry the "oSa" (The Organisation for the Safety of Abrasives) mark of approval. "oSa" is an association of the world's leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. "oSa" marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

Type 27 Depressed Centre Grinding

For use with all portable angle grinders. Not to be used for wet grinding. Optimum angle for use 25° to 35°. Grade A30/AS30 - for general purpose use on metals. INOX - for use on Stainless steel (iron, chlorine and sulphur free).

York? Flap Wheel Sets

Shaft mounted flap wheels can be used in portable air or electric power tools, including tyre buffers, flexible shafts and hand drills. Manufactured from highest quality industrial cloth. Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting. Recessed hub design for maximum access in tight corners.

8 Piece - 6mm Shank

Contents: 30 x 15mm: P60, 30 x 15mm: P120, 40 x 15mm: P60, 40 x 15mm: P120, 50 x 20mm: P80, 50 x 25mm: P60, 60 x 30mm: P40, 60 x 30mm: P80.

3M Roloc? Brush Products

Designed for use on portable tools and featuring the convenient Roloc twist-on, twist-off fixing system.

Clean & Finish Flap Brush R

Flaps of high performance finishing web ideal for decorative finishing and light deburring applications.

Dynabrade Pencil Micro Air Die Grinder

51731
Precision deburring & grinding. Excellent for use on tooling, dies, molds, production parts and more. Polishing, etching, wax forming, routing, bevelling, dulling, shaping, flash removal, and trimming & cutting CNC machining. Ceramic bearings provide better performance and durability with regard to high shaft speeds, dirt, extreme temperature, corrosion and other environmental factors. High-speed air motor, controlled with patented governor, provides constant speed under load. Precision, high-tolerance, low run-out collet.

Specifications:
1/4" NPT air inlet.
0.1hp motor.
Rear exhaust.
3mm collet.
Overall length: 133mm.
Noise level: 69dB(A).
No load speed: 60,000rpm
.

Kobe™ 1" Drive Heavy-Duty In-Line Air Impact Wrench

Suitable for industrial and commercial production and assembly applications. Side handle for two handed operation. Top mounted spring balance loop. Easy to use forward/reverse switch and three position power regulator. Top venting exhaust. Oiling points for daily maintenance.

Specifications:
Free speed: 3,300rpm.
Final drive: 1" (25mm) hex.
Working torque: 2,030Nm (1500lb.ft.).
Maximum torque: 2,300Nm (1700lb.ft.).
Safe working pressure: 90psi (6.2bar).
Air inlet thread: 1/2" NPT.
Minimum air hose size (ID): 1/2" (13mm).
Air pressure: 90PSI (6.3Bar).
Air consumption: 0.7CFM.
Sound pressure level: 87dB(A).
Vibration level: 5.9m/s2.
Overall length: 500mm.
Weight: 9.34kg.

Norton Straight Wheels For Surface Grinding

AVS: Aluminium oxide abrasive used on all ferrous materials including mild steel, carbon steels and wrought irons. CVS: Silicon catbide abrasive used on non-ferrous materials that includes copper, aluminium, stone and cemented carbides. 38A: Sharp, friable aluminium oxide abrasive used for grinding hard, heat sensitive steels. Well suited for cylindrical, surface and internal applications.



(Type 1) In a choice of Medium or Soft.

York? Sanding Bands

Spiral wound with tear resistant backing fabric. For grinding and finishing edges, profiles, welded joints etc. For use with power tools. Aluminium Oxide for use on most metals. Available in several sizes.

Aluminium Oxide Sanding Bands

Size: (Dia)51mm x (W)25mm.

Flexovit Grinding Wheels

WA: Pure and refined aluminium oxide with good cool cutting characteristics and a good speed of cut. For high speed steels, precision grinding operations and general surface grinding.

Type 1, Plain