3/4" Square Drive Professional Adjustable Ratchet

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



Incorporates "click" sound and "snap" feel to indicate when torque setting has been reached. Non length dependant. Extension handle can be used to reduce operator effort (extension handle supplied as standard with models 800, 1000 and 1500). Fine 60 tooth ratchet allows the wrench to be used in confined areas. Accuracy of +/-3%. *Weight does not include extension handle. Extension handle specification, Length 700mm, Weight 1.6kg.

Torque Range: 110-550Nm 80-400ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

16mm Spigot End Fittings

Metric

Flare End

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

Open End Slogging Wrench

With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Back Saw/Tenon Saw

Reinforced back for extra rigidity makes a straighter cut. Handle screwed to blade for extra strength. Finger rest - ergonomic design, useful for extra control when starting a cut. Triple edged teeth cut on both push and pull strokes for ease of cutting. Induction hardened teeth. 45 and 90 angle quick reference points. Bi-material handle for improved grip and comfort.

Size 12in/300mm. 11TPI.

FatMax

Knife Blades

Normal duty blade for use on paper, card and leather. Size: 50 x 19 x 0.45mm.

1991

Stabila 80K-80 Hammer-Top Masons Spirit Level

80K-80
Based on the popular Type 80A, the Stabila 80K Hammer-Top Spirit Level has been specially developed for use by bricklayers. Made from extra strong but lightweight metal alloys, it features reinforcement ribs that make the level easier to handle. Along the top surface of the level is a hammer-top that allows you to correct any discrepancies in brickwork or paving directly, by lightly tapping with your trowel. It can also be used to check and adjust the level on tiles.
The level has a single vertical vial and a single horizontal vial. The horizontal vial has a viewing angle of up to 300° and also has six rings to allow the level to also be used with 1% and 2% slopes. At each end of the level, impact resistant end caps provide good shock-absorption in the event that the level is dropped.
Overall length: 800mm (32”).

Seal Repair Kits

To suit the Kennedy Hydraulic Bench Press (KEN-985-9470K) illustrated.

Senator® President Decorators' Tools

High carbon, clear lacquered steel blades. Wooden handles and half tang fixing. Suitable for general duty and household use.

Scraper (Half Tang)