Ring Slogging Wrenches

Manufactured to DIN 7444.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Brake Pin Punches

Parallel pin punches for the removal of brake calliper pad retaining pins. 165mm overall length. 6.0mm diameter punch uses a pilot tip to aid location in hollow pins used on GM/Vauxhall callipers. Overall length: 165mm.

Single & Bi-Hexagon Sockets

The most popular drive size used in the service and maintenance industry. This popularity is due to the strength and robust nature of 1/2" drive. All Kennedy Professional sockets are knurled to give a high grip which is essential for a quick tool change even when greasy/oily. Made from chrome vanadium and fully chrome plated with a mirror finish. Aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.

Metric Deep

1/4" AF Hexagon 'Direct Drive' Screwdriver Bits

1/4" Hex with ball recess.

Torx

Insulated Tweezers

Straight/bent pattern tweezers with serrated gripping surfaces, quality tested and insulated to 1000V AC. Conforms to EN 60900 standards.
Overall length: 145mm. Exposed blade length: 15mm.

Bent Insulated Tweezers

Bent pattern tweezers with serrated gripping surfaces for extra grip. Quality tested and insulated to 1000V AC. Conforms to EN 60900 standards.

Kennedy Impact Drive Sockets

Kennedy 1,1/2" square drive impact sockets are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings.

1,1/2" Drive Metric Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

1,1/2" Impact Drive Sockets

16mm Spigot End Fittings

Metric

Open End

Heavy-Duty Wire Strippers

Multi-purpose tool with alloy steel jaws suitable for stripping, cutting and crimping all types of wire. Automatic wire stripper. Crimps - non-insulated terminals 1.5, 2.5 and 4 - 6mm (12 - 10, 22 - 18 and 16 - 14 AWG). Crimps - insulated terminals 1.5, 2.5 and 6mm (10 - 22 AWG). Capacity: 0.13 - 6.0mm2.

Cabinet Scrapers

Used for removing fine shavings from wood surfaces, leaving a very smooth finish. Manufactured from hardened, tempered and polished carbon steel. Available in 2 sizes: 5" x 2.5" and 6" x 3".

179 True RMS Voltage and Current Measurements Multimeter

0.09% basic accuracy, 6000 count resolution. Digital display with analogue bargraph and backlight. Manual and automatic ranging. Display hold and auto hold. Frequency and capacitance measurements. Resistance, continuity and diode measurements. Temperature measurements.
Min-max-average recording. Smoothing mode allows filtering of rapidly changing inputs. Easy battery exchange without opening the case. Closed case calibration through front panel. Ergonomic case with integrated protective holster. EN61010-1 Cat III 1000V/Cat IV 600V. Measures twice as fast as other multimeters
Accessories include:
80BK temperature probe. Installed 9V battery. Test leads. Users manual.