Q-MAX Cutters

The non-rotating metal hole cutter is manufactured from high tensile steel heat treated for a long keen cutting life providing burr free accuracy time after time.

To produce the hole a small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the materials. Pressure is then applied by tightening the bolt and thus the hole is literally punched out.

Capacity:
Mild steel up to 16swg (1.62mm).
Stainless steel up to 16swg (1.62mm).
Sheet copper, brass and aluminum up to 2.0mm.
Plus many other sheet materials and ductile plastic.

Other sizes available on request. Inch 3/8" to 1 3/4 ". Metric 10mm to 76.5mm. Plus squares and rectangles.

Metric

STHT0-05899

Stainless steel blade prevents rusting and provides durability. Slight bow in blade allows user to make perfect drywall joints. Bi-material handle provides comfort and protection.



Blade: 320 mm x 130 mm

11mm Offset Chrome Vanadium Combination Spanner

Chrome vanadium steel. 15 cranked open end. Offset ring end. Conforms to DIN 3113B.

Bearing Separators

For removing bearings, gears and bushes from shafts where access with a mechanical puller is restricted. Separators have tapered edge for insertion behind close fitting bearings, gears and bushes. Jaw hardness 42- 45 HRC.

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric Deep

3/4? Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Disc Magnets

Nickle plated neodymium disc and block magnets Magnetic poles on both faces, supplied in tubes. Maximum working temperature 100°C

Disc

Hand Stamps

Manufactured from Sheffield tool steel nickel plated. With chamfered edges to prevent damaging the surface of the workpiece. For making a clear permanent mark legible even after subsequent painting or plating. Positive Indent (Standard)

Letter Sets A - Z Plus &

Nylon Coated, Double-Sided Auto Locking Tape Measures

These tapes have a nylon coating for extra life. The double sided marking makes all the difference when measuring ceilings and window reveal etc. All come with an automatic brake which locks the blade in position during use until you press the release control button. They also benefit from a sliding magnetic hook and belt clip.

3m Auto Locking Tape Measure

This tape measure has metric graduations on both sides with easy to read markings.
Blade width: 16mm.

Elliot Lucas Engineers' Combination Pliers

Unsleeved handles, for use in environments where bare metal handles are appropriate. The handles are impervious to swarf, glass chippings and are resistant to heat melting.

PW216 10" (255mm)