5 Piece Wrench & Diestock Set

Contents: Diestocks: ductile steel bodies with knurled handles. Outside diameter: 20mm/13/16", & 32mm/1 5/16" & 38mm/1 1/2". Tap wrenches: hardened and tempered Ground jaws: ductile steel bodies with knurled handles. Square size: 1.6mm - 6.4mm & 4.8mm - 12.7mm

Bahco Slip Joint Pliers

Chrome vanadium phosphate finish with hardened jaws for gripping both flat and round material. Ergonomically designed plastic coated handles.

Slip Joint Pliers

Length: 240mm.

Kennedy® Inserted Pin Punches

Manufactured from chrome vanadium steel. Used for punching out pins and dowels.

Extra Length

Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset. Conform to: 5.5mm - 25mm, 1/4? - 1? AF - DIN 3113. 26mm - 95mm, 11/16? - 2?AF - ASME B107.6.
1/8? - 1/2? Whitworth - DIN 3113 & BS192:1982. 9/16? - 7/8? Whitworth - ASME B107.6 & BS192:1982.

Metric

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Crosspoint

Q-MAX Cutters

The non-rotating metal hole cutter is manufactured from high tensile steel heat treated for a long keen cutting life providing burr free accuracy time after time.

To produce the hole a small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the materials. Pressure is then applied by tightening the bolt and thus the hole is literally punched out.

Capacity:
Mild steel up to 16swg (1.62mm).
Stainless steel up to 16swg (1.62mm).
Sheet copper, brass and aluminum up to 2.0mm.
Plus many other sheet materials and ductile plastic.

Other sizes available on request. Inch 3/8" to 1,3/4 ". Metric 10mm to 80mm. Plus squares and rectangles.

Metric

Metric

High mechanical performance combined with compact design complying with aeronautical standards:
Ring heads:
Ring clearance designed for better access to recessed or closely spaced screws. 12-point OGV profile for a high torque without damaging the nut. Angled at 15°.
Open-ends:
Optimised open end / handle geometry for increased accessibility. Ground contact faces. Satin chrome finish.
Industrial and automotive : ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1, NF E74-306. W Aerospace: SAE AS 954E.



Open end profile is designed to allow greater accessibility & turning arc versus standard pattern combination wrenches. Ring end is thin walled with a high relief zone for greater access to recessed and hard to access bolts. Open ends have mechanical characteristics above and beyond NF ISO 1711 - 1. Ring ends are designed to outperform Aerospace SAE AS 954E Standards.

Short Arm Combination Spanners

Short arm (stubby) combination spanners manufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion-resistant and easy to clean. The jaws and ring are offset at 15 for easier location and application of torque to the fastener. Ideally suitable for use in areas of very restricted access, in the automotive, aerospace and assembly industry. Conform to ASME B107.6.

Senator® Sidewinder Drill

Titanium nitride (TiN) coated for increased tool life and performance. Standard 118 drill point. Available in 6mm or 8mm shank diameters suitable for use in electric and air powered drills. The side cutting teeth allow the drill to be used for producing any size or shape of hole in wood or plastic.

Diameter: 8mm. Overall Length: 97mm (3,13/16")

Thorace Dead Blow Hammers

Hollow die cast head partially filled with steel shot, which adds to the weight of the impact and prevents rebound, delivering a dead blow. The handle is manufactured from aluminium alloy with a shock absorbent non slip rubber grip. Supplied with two screw in replaceable white nylon faces.