16mm Spigot End Fittings

Metric

Flare End

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

1/2" x 12"

Hinged Pipe Vice

Used for repetitive pipe work, the top jaw is held in position with a hook, which automatically engages when the vice is closed. SG ductile cast iron frame with steel handle screw and jaws.

Non Approved Fuel Containers

Durable polyethylene containers. Diesel, petrol, chemical and oil resistant. Integral rigid dispensing spout.

Air Trolley Jack - 20/40T 2 Stage

For use when lifting heavy vehicles such as lorries etc. This industrial air jack has a robust steel chassis, 'T' bar handle with integral air control valve and two extensions for increased lifting height.
It requires an air pressure of 116 - 174psi (8-12bar) and a supply rate of 105Ltr/min (3.7cfm).

Electricians' Flat Nose Pliers with Notched Wire Cutter

Bonded vinyl coated handle. Double polished head and joint. Induction hardened cutting edges. Serrated Jaws.

Road Measuring Wheel with Carry Case

Ideal for measuring distances to quantify distance or area for accurate ordering of aggregates, turf, tarmac, slabs and other large area requirements. Gear driven 5-digit counter mechanism with weather resistant housing. Exact point indicator. Trigger operated brake. Spring loaded kickstand. 2 reset butons.

E-Torx Ring Spanner Set

4 Piece set manufactured from chrome vanadium steel. Drop forged. Polished finish. Supplied in wallet with hanging holes. Contents: E6 x E8, E10 x E12, E14 x E18 & E20 x E24.

3/8" Square Drive Bi-Hexagon Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

Metric

Combi Shave Hook

Heavy-duty blade and quality wooden handle. For removing paint from flat, concave and convex mouldings.