Kennedy Drain Rods

Kennedy drain rods are the essential tool to have to easily and rapidly unblock drains, pipes or sewers. They are manufactured to exacting industry quality standards using polypropylene rod tubing that is fitted with solid brass threaded joints securely fixed in place with brass rivets. These Kennedy drain rods are strong, durable and are slightly flexible to ensure the rods have the right amount of flex to make it easier to feed them into the drain through the inspection hatch and to follow the bends in any drain, pipe or sewer. A full range of plunger, worm screw and drop scraper attachments are available.

Available as two different types of rod connecting joints:

Universal screwed thread connectors for rapid assembly and disassembly.
Lockfast retaining nut joints are secured with a spanner.

For the full range of Kennedy Plumbing tools please refer to our catalogue.

Heavy Duty 'Lockfast' Flexible Drain Rods Set

The Kennedy heavy duty drain rods have a lockfast retaining nut that must be tightened or loosened with a spanner, rods fitted with this type of joint can be rotated in either direction in use and will remain securely fastened in even the most demanding of conditions.

Set Contents;
10 x 20mm x 900mm LRN joint rods
1 x 100mm double worm screw
1 x 100mm Plunger
1 x 100mm Drop scraper
Also supplied with 2 rod ties.

Kennedy Hydraulic Bottle and Trolley Jacks

Kennedy Hydraulic bottle jacks have large cast iron bases with a steel housing and lift cylinder, that has an adjustable notched load saddle. Each jack is fitted with an overload protection valve. Two piece pumping handle also operates hydraulic release.

For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

GS and TUV approved.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Hydraulic Bottle Jacks

Model number: B845
Maximum load: 8 Metric Tonnes.
Height range: 230 to 457mm Min/Max.
Max saddle adjustment: 80mm.
Weight: 5.75kg.

(Load ratings are Metric Tonnes i.e. 1 tonne = 1,000kg).
Supplied with spare seals.

Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

Ring End Slogging Wrench

With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Q-MAX Cutters

The non-rotating metal hole cutter is manufactured from high tensile steel heat treated for a long keen cutting life providing burr free accuracy time after time.

To produce the hole a small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the materials. Pressure is then applied by tightening the bolt and thus the hole is literally punched out.

Capacity:
Mild steel up to 16swg (1.62mm).
Stainless steel up to 16swg (1.62mm).
Sheet copper, brass and aluminum up to 2.0mm.
Plus many other sheet materials and ductile plastic.

Other sizes available on request. Inch 3/8" to 1,3/4 ". Metric 10mm to 80mm. Plus squares and rectangles.

Metric

3/8" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric Deep

1" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric

1? Drive Metric, Standard Length, 6-Point
Conform to: DIN 3129.

1/4" AF Hexagon 'Direct Drive' Screwdriver Bits

1/4" Hex with ball recess.

Crosspoint

Wooden Handled DIY Decorators' Paint Brushes

With painted wooden handles. Chrome plated lapped and pressed steel ferrules. Long pure bristles. Ideal for DIY use.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Kennedy Chrome Finish Adjustable Wrench Service Kits

Consist of replacement jaw, knurl and pin.