Sitesafe Post Hole Bar - Chisel End

S62424
Steel Post hole digging bar manufactured from high grade heat treated steel bar with one chisel point and one tamper head. The post hole digger has a 60mm mushroom head at one end and a bevelled chisel edge at the other. It is frequently used for digging small holes in earth.

Overall length: 1800mm.
Blade size: 230 x 60mm.
Weight: 8.00kg.

Single & Bi-Hexagon Sockets

The most popular drive size used in the service and maintenance industry. This popularity is due to the strength and robust nature of 1/2" drive. All Kennedy Professional sockets are knurled to give a high grip which is essential for a quick tool change even when greasy/oily. Made from chrome vanadium and fully chrome plated with a mirror finish. Aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location.

Metric

Kennedy Stillson Pipe Wrenches

Jaws are serrated in the opposite direction to ensure a secure grip. Used mainly in the plumbing industry for gripping pipes & nuts. Cast iron frame, drop forged handles and jaws. All moving parts are heat treated. Used mainly in the plumbing industry for gripping pipes and nuts. Conform with BS 3594 : Part 2. Available in 8 sizes ranging from 8" - 48".

Heavy-Duty

Combination Spanners

Manufactured from drop forged steel with 15° cranked heads. Conforms to ASME B107.6.

22mm Offset Chrome Vanadium Combination Spanner

Chrome vanadium steel. 15 cranked open end. Offset ring end. Conforms to DIN 3113B.

Kennedy® Telescopic Gauges

With knurled satin finish bodies providing positive adjustment of the hardened and radius ground plungers ensuring accurate measurement of the internal diameter when used with a micrometer. For smaller diameter measurements use a small hole gauge.

Pipe Cutters & Wheels

Single cut wheel with two (3 - 30mm) and four (5 - 64mm) rollers. Suitable for stainless steel, brass and copper tubes. With deburring blade.
*5550K has quick release mechanism.

Spare Striking Faces For Thor Hammers

Easy to change, simply screw in. The striking faces are colour coded to allow easy identification of material type and hardness.

Red

Medium plastic shore D45-55. For light hammering applications.

Q-MAX Cutters

The non-rotating metal hole cutter is manufactured from high tensile steel heat treated for a long keen cutting life providing burr free accuracy time after time.

To produce the hole a small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the materials. Pressure is then applied by tightening the bolt and thus the hole is literally punched out.

Capacity:
Mild steel up to 16swg (1.62mm).
Stainless steel up to 16swg (1.62mm).
Sheet copper, brass and aluminum up to 2.0mm.
Plus many other sheet materials and ductile plastic.

Other sizes available on request. Inch 3/8" to 1,3/4 ". Metric 10mm to 80mm. Plus squares and rectangles.

Inch

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.