Easy-flo? Flux Powder

Easy-flo Flux Powder is Johnson Mattheys leading brand brazing flux. It is sold widely throughout the world and is recognised as one of the best flux powders available. It is very fluid at the bottom end of its working range resulting in early and extensive flux spread. This ensures that the joint surfaces are well protected from oxidation at the earliest possible point of the brazing operation. This high level of fluidity also helps to reduce flux voids/entrapment in the joint, the low viscosity of the flux aiding its displacement by the brazing filler metal from the joint gap. Easy-flo Flux Powder has a working range of 550-800C. It is suitable for use with silver brazing filler metals melting below 750C (such as Silver-flo, Easy-flo and Argo-braze filler metals).

Easy-flo Flux Powder has excellent hot rodding characteristics and adheres well to a warmed brazing rod allowing flux to be transferred to the joint area via the rod. This characteristic has made Easy-flo Flux Powder very popular in hand brazing operations where the time to produce a brazed component is crucial.

1/2" Square Drive Bi-Hexagon Sockets

The most popular drive size used in the service and maintenance industries. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

A/F

Hinged Pipe Vice

Hinged pipe vice, used for repetitive tasks on pipework. The frame of the pipe vice is made from cast iron with jaws made from hardened tool grade alloy steel with a corrosion resistant coating. The top jaw of the pipe vice is held in position with a hook which automatically engages when the vice is closed. Can be fitted to bench or stand.

Quick Release Ratchet Handle

With thumb lever for reversing without having to remove the socket or accessory. Highly polished chrome vanadium with rubber grip. Overall length: 250mm.

Formers & Guides for Irwin UL223 Bender

Generally compatible with other Irwin-Hilmor pipe benders including GLM, EL25, EL32, CM35, CM42, K3b and Condubend - subject to actual bender pipe size capacity.

1/4" Square Drive Screwdriver Bits

Manufactured from high quality chrome vanadium, fully polished finish. Conform to DIN. Overall length: 37mm. Bit length: 19mm.

Torx

Trolley Jack Spares

Seal Repair Kit for Kennedy 2 Tonne Trolley Jack (KEN-503-6320K) illustrated.

Offset Double Ended Screwdrivers

Designed to give access into otherwise restricted areas. A versatile tool suitable for use in many applications.

Kennedy Soft Faced Hammer

Kennedy soft-faced hammers have composite material striking faces that DO NOT have any metal in them that would mark the surface of the work piece. They are a safer alternative for striking machined surfaces than conventional steel hammers that would damage the surface. The impact-resistant composite material striking face shapes itself to the component being struck, minimising rebound damage to the component and reducing noise pollution in the work place.

Replacement Nylon Hammer Heads

Kennedy nylon hammerheads are for use with the Kennedy Nylon Faced Hammer they are reinforced for extra strength and to prevent fracturing from off centre strikes. Each nylon hammerhead has a precision moulded screw thread that screws securely into the chrome plate zinc hammerhead.

Stanley FAT MAX Screwdrivers

Stanley Fat Max screwdrivers with soft grip handles and smooth domed ends to allow added comfort and a fast spinning action. Handles are moulded directly to the chrome vanadium shaft by a virtually unbreakable bond making them highly reliable and providing extra long life. colour coded ends allow for easy identification of the `right` screwdriver for each screw type.