Ratcheting Hose Pinch Pliers

For clamping flexible brake lines, fuel lines, vacuum hose and other fluid lines. Allows servicing to be carried out without the need for system draining. Heavy duty serrated jaw edges provide excellent clamping whilst avoiding damage to hoses. Jaws pivot and self level to ensure parallel clamping.
Fine-adjusting ratchet action allows hoses to be fully or partly closed. Cocking mechanism holds pivot jaws firmly in position. All steel construction with corrosion resistant finish.



200mm (8") Long.
For hoses up to 22mm diameter. Shorter handle length allows access in confined spaces.

1/4", 3/8" Square Drive "P" Type, Ratchet Head (Pre-set)

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



Accuracy exceeds all international standards. Traceable calibration certificate supplied to satisfy ISO 9000 quality systems. High quality 72 tooth ratchet allows use in confined spaces. Torque Handle versions, both 16mm spigot and 9 x 12mm female. Unmistakable signal when set torque is reached. With reversible ratchets. ?P? Type versions designed to discourage unauthorised alteration.

Torque Range: 4-20Nm 40-180ibf.in

For further specification on this product please see the attached PDF under the additional information tab.

Hexagon Ball Drivers

Can be used at angles of up to 30 from the screw head, making them ideal for awkward access areas. Manufactured from hardened carbon steel, available with fluted driver handles, L-wrench pattern or T-handle.

Kennedy® Magnetic Long Reach Pick-Up Tool

90mm diameter - long reach handle.
High power magnet for easy pick up and release of metal objects.
Can be used for scrap and ferrous debris.
Spring loaded magnet release.
Permanent magnet, never needs to be re-magnetized.

Whitney Replacement Punches

To suit the Whitney Junior Metal Punch (WHI-560-0501A)

Kennedy® Butane Soldering Tool

Piezo self ignition. Uses standard butane lighter fuel and is simple to refill. Fully adjustable tip temperature control with a safety fuel cut-off when cap is replaced. Textured anti-slip barrel with built in stand for anti roll. Supplied with pointed soldering tip. Can be used with double flat, hot air, flame and hot knife, can also be used as a blow torch. Supplied without fuel.

Power rating: 50W.
Soldering temperature: 375°C.
Run time: 60 minutes.
Overall length with cap: 195mm.
Overall length with soldering tip: 180mm.

Kennedy® Inspection Mirrors

Ball and socket universally positional joint, holds the high grade distortion free mirror at any angle. Chrome plated high polish finish telescopic shafts.

Circular Mirror

Masonry Roller Kit with Brush

Advanced woven fabric for greater paint holding capacity.
10"(254mm) extra long pile padded roller. 4"(100mm) masonry brush. For use with emulsion or masonry paints on rough and uneven surfaces, such as brickwork and rendered masonry.
Gross weight: 940g

Senator® Engineers' Starter Tool Kit

Senator® Quality Tooling Tool kits are available for the home handyman, the builder, the workshop engineer and the decorator. All the kits contain the most essential tools required.

They are a great way to kit yourself out with the tools you require quickly and easily, at very competitive prices!

Engineers' Starter Tool Kit (47 Pieces)

6 piece 16cm cut 2 assorted needle file set.
10x 12 x 1/2" x 18T all hard hacksaw blades.
8" (200mm) C/V adjustable spanner.
6" (150mm) stainless steel rule with pocket clip.
Metric and Inch feeler gauge blade length: 60mm.
1lb ball pein hammer with hickory shaft.
16oz black rubber mallet with wooden shaft.
5M/16ft locking tape rule with chrome casing.
8 segment 18mm heavy duty snap-off blade knife.
Retractable trimming knife.
12" DIY hacksaw.
6" heavy duty snipe nose pliers with side cutter.
6" diagonal cutting nipper.
7" linesman pliers.
10" multiple slip joint plier.
10" straight jaw high strength grip wrench.
8 piece fluted handle screwdriver set.
7 piece 6-19mm drop forged open-ended spanner set.
8" straight blade tinsnip.
supplied in a 21" 5 tray cantilever toolbox.

Tile Cutter/Scorer

Solid plastic handle with double edged tungsten, extra hard, carbide cutting tip.