Carpenters Hammers

Forged steel head with ground and polished striking face.

Warrington Cross Pein

Kennedy Hexagon Key L-Wrenches

Manufactured from fully hardened carbon steel in accordance with DIN 911 ensuring a quality ductile key with precision square cut ends and accurate AF dimensions to ensure full socket contact. Black finish.

Inch

Crescent Ring Wrench

Chrome vanadium steel with satin chrome finish. Heads conform to DIN 838.

Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

Ring End Slogging Wrench

With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Kennedy® Long Parallel Pin Punches With Air Grip

Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. Fitted with an air grip handle that absorbs vibration as well as deflecting wayward hammer blows.

TX Sockets

Chrome vanadium. For use with male headed TX fasteners commonly found in the automotive industry. Overall length: 37mm.

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Tri-Wing

Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

Single Open Ended Spanner

1/2" Square Drive Socket Set

Manufactured from industrial quality chrome vanadium steel with corrosion resistant high polish mirror finish, aluminium free to ensure non-sparking. The 12 point bi-hexagonal side drive sockets allow higher torque's to be applied to nuts without damage and grip worn nuts. With chamfered leading edges for easier location on the fastener. The strength and robust design of 1/2" drive make them suitable for the heavy use encountered in agriculture, service and maintenance industries. Sockets manufactured to: ANSI B107.5M:1987. Accessories manufactured to: ANSI B107.10M:1982.

Metric (50 Pieces)

Contents: Sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 33 & 36mm. Hex Bit Sockets: 4, 5, 6, 7, 8, 10, 12, 14, 17 & 19mm. Philips Sockets: No 2, 3 & 4. Chrome Molybdenum Screwdriver Bits: 9 & 14mm chemically blacked. Spark Plug Sockets: M14 & M10. Accessories: Black rubber ratchet handle, T-handle, swivel handle, universal-joint, 75, 125, 250mm extension bars. Robust fitted case with magnetic parts tray, padlock hole and cushion grip handle.

Rubber Mallets

Provide a gentle but firm blow with little rebound. Solid wooden self locking handles. The mallets are available in a range of sizes and grades of rubber to meet specific requirements.

Standard

All purpose mallet used widely for automotive, industrial, DIY and camping etc.