3/8" Square Drive Bi-Hexagon Sockets

Used most often in the automotive and aerospace industries. The weight to strength ratio ensures the reliability and accessibility that is so important in this type of production environment. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all accessories. Chamfered leading edge ensures easy fastener location.

Metric Deep

Bi-Hexagon sockets - 12 point - side drive design gives a higher torque than normal sockets, grip worn nuts and will not round off existing nuts. All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories. Requires only a one-twelfth turn to engage the next point of the socket

8 Piece Torx Key Ring Set

Manufactured from chrome molybdenum steel. Torx is a registered trademark of Camcar/Textron.

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Flat

Insulated General Purpose Tool Kit

General purpose insulated tool kit supplied in a black case with foam 'tool control' insert. Manufactured to IEC 600900:2004, Category 'C'.



Set contents:
8” engineers combination pliers,
6” diagonal cutting nippers,
8” long snipe nose pliers,
7” cable jointers coring knife,
3” terminal screwdriver 1/8” (3mm),
3” electrician’s screwdriver 5/32” (4mm),
6” insulated screwdriver 3/16” (5mm),
6” insulated screwdriver 5/16” (8mm),
No.1 Philips screwdriver (75mm blade length),
No.2 Philips screwdriver (4” blade length),
reversible ratchet handle (1/2 sq. dr.),
5 and 10” Extension bars (1/2” sq. dr.),
insulated sockets (1/2” sq. dr.): 10 - 14, 17 and 19mm,
hex keys: 5 and 6mm,
open ended spanners: 10 - 14, 17 and 19mm.

Replacement Bolt Cutter Jaws

Centre Cut Jaws designed to efficiently cut high tensile materials by directing the force being applied into a small area. Ideal for use on materials such as non ferrous rods and bars, mild steel bolts etc.

Centre Cut

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Knife Blades

To use in conjunction with the Kennedy 16 piece precision Knife Set

General Cutting & Slicing

1" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric Deep

1? Drive Metric, Deep Length, 6-Point
Conform to: DIN 3129.

Senator® Quality Tooling Tool Kits

Senator® Quality Tooling Tool kits are available for the home handyman, the builder, the workshop engineer and the decorator. All the kits contain the most essential tools required.

They are a great way to kit yourself out with the tools you require quickly and easily, at very competitive prices!

HHK32 Home Handyman Tool Kit (32 Pieces)

The HHK32 Handyman tool kit from Senator® Quality Tooling contents 32 tools for the home handyman. They are supplied in a robust Tuff-E plastic toolbox that has a double lid latch and padlock hasp hole.

Contents:
18 piece wood, metal and masonry drill set, in a dial a drill' case sizes:
6x wood drills with `lip and spur` self-centering/self-starting points - suitable for all types of timber. Sizes 3, 4, 5, 6, 8 & 10mm.
6x masonry drills with TCT drill point. Suitable for tiles, ceramics and all light building materials such as breeze block, brick and mortar - sizes 3, 4, 5, 6, 8 & 10mm.
6x HSS Drills (Jobber) with roll forged flutes - suitable for use in portable powertools in all types of materials such as wood, plastics, metals and tube and sheet materials. Sizes 3, 4, 5, 6, 8 & 10mm.

8 piece fluted handle screwdriver set contains:
Flared: 6mm stubby, 3 x 100mm and 8 x 200mm.
Parallel: 3.2x75mm and 4 x 150mm.
Pozidriv: No.2 stubby, No.1 x 75mm and No.2 x 100mm.

Diagonal cutting nippers 150mm (6'') - for cutting wire, the cutting edge is set at a slight angle to the handles, this allows you to cut close to a flat surface, and leave the hand clear of any obstructions.

Snipe nose pliers with side cutter 150mm (6'') - with serrated jaws, tapered to work in confined spaces. Capable of gripping and manoeuvring small objects in confined areas.

Linesman pliers 180mm (7'') grip and cut. They are often referred to as engineers' pliers, or if the handle is insulated, electricians' pliers. The jaws are serrated for gripping flat surfaces. The cutter is positioned behind the gripping section of the jaw.

8 segment snap-off blade knife with a contour moulded grip and steel blade slide that prevents the blade slipping or case splitting and gives the knife a smooth action. A blade locking switch is in the thumb slide. Overall length: 130mm.

3M/10ft locking tape rule in a tough plastic case with a spring assisted blade return and locking switch. The self aligning hook on the end of the steel blade has corrosion resistant laminated coating and held in place by four rivets.

Set contents may vary slightly according to product development and availability.

Cooks Knives

All Granton knives are available with a choice of red, blue, yellow, green, brown, white or black handles. This system helps prevent cross contamination by assigning coloured handles to particular work areas.



A cooks knife has a curved blade designed to 'rock' from handle to tip for a gentle, even rocking and gliding motion as you cut. Exceptionally safe wide blade is also great for scooping and gathering after cutting. Suitable for dicing onions and peppers, also makes slender "matchstick" French fries and thinly shreds cabbage. Use the whole blade to cut larger items or use the flat side of the blade to lightly smash the skins from garlic cloves.