Kennedy Heavy-Duty G-Clamps

The Kennedy Quality Industrial Tooling G-clamps have drop forged steel bodies with anti-twist ribbed reinforcement and a precision machined drive screw with swivel shoe for positive location on the material being clamped.

Senator® Forstner Bits

For precision hole boring. Self piloting point combined with trepanning style cutting action will produce overlapping holes in any direction. Ideal for scroll and scalloping applications. Suitable for use in bench and pillar drills to bore a wide range of timber, plastics and other materials.

Feeler Stock Strip

These gauges are widely used in automotive, aviation, diesel and farm equipment manufacture and service, and also in jig, fixture, gauge and experimental work. Inch sizes are 12" long, 1/2" wide and furnished in 32 different thicknesses ranging from .001 - .025". Millimetre sizes are furnished in 300mm lengths, 12.7mm wide in 14 different thicknesses ranging from 0.03 - 0.50mm. Rounded ends - no ragged edges make stock easier to work with. Each piece marked with thickness and in individual envelope, with convenient 3/16" (5mm) hole punched in the end for hanging.

1/2" x 12"

3/8" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Metric Deep

3/4" Square Drive Industrial Adjustable Ratchet

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



Robust construction gives accurate results to +/-4%. Back break action indicates when specified torque has been achieved and improves accuracy by reducing the possibility of over tightening. With calibration certificate fully traceable and suitable for ISO 9000 assessment purposes. With ratchet.

Torque range: 100-500Nm 75-350ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

Open Jaw Spanners

Made from forged and hardened steel. Conform to DIN 895.

Double Ended

Open Jaw Slogging Wrenches

Manufactured to DIN 133.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Thorex Nylon Faced Hammers

Chrome plated zinc heads with two screw on nylon striking faces.

Wooden Handle

One Handed Bar Clamps/Spreaders

I-Beam bar resists twisting and bowing allowing maximum force to be applied. Patented POWER LOCKS? hold more pressure, longer. Provides 550lbs of one-handed force (900lbs of two-handed force). QUICK-RELEASE? trigger for non-explosive pressure release. QUICK-CHANGE? jaw converts quickly into a spreader. 95mm throat depth accommodates larger workpieces. Non-marring pads grip securely and protect workpiece finish.

XP

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Hexagon