1/4" Square Drive Bi-Hexagon Sockets

Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. All Bi-hexagon unless stated.

Metric Deep

Kennedy Ball Pein Hammers

Ball Pein hammers are manufactured from high-grade drop forged steel fully heat-treated. Ideal for use with cold chisels, punches, rivets and for the shaping of metal.

Fibreglass Shaft

With textured slip resistant rubber grip. Shaft and grip combine to dampen the impact transmitted through to the user's hand & wrist. Reduces operator fatigue and the risk of RSI (Repetitive Strain Injury). The high strength of the shaft and head bond make the hammer virtually unbreakable.

Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

Metric

Single Hexagon Sockets

Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. Manufactured from chrome vanadium, fully chrome plated with a mirror finish and aluminium-free to ensure non-sparking. Chamfered leading edge ensures easy fastener location. 6 point - offer a more positive location, particularly on worn or rounded nuts, but require a one-sixth turn to engage the next point of the socket.

Bi-hexagon

AF (Deep)

1/4", 3/8" Square Drive Adjustable Ratchet Fixed Head (Push Through)

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



72 tooth fine ratchet mechanism which allows use in confined areas. Incorporating "click" sound and "snap" feel to indicate when torque setting has been reached. Knurled disc on the ratchet head to reverse ratchet direction. Clear plastic handle protects the scale from accidental damage. Torque setting can be altered by rotating the adjustment lever at the base of the wrench. Pre-set "P" type versions available to eliminate the torque setting being altered on the production line. Fixed head version has push square drive for instant direction reversal. All with ratchet except 11125 which is non-ratchet.

Torque Range: 4-20Nm 40-180ibf.in

For further specification on this product please see the attached PDF under the additional information tab.

Carving Knives

All Granton knives are available with a choice of red, blue, yellow, green, brown, white or black handles. This system helps prevent cross contamination by assigning coloured handles to particular work areas.



This particular knife is ideal for cutting large sized roasts or large cakes. Features special half moon serrations which enable the user to cut items that have a soft centre without crushing it.

Overall length: 15 1/2''.
Stainless steel blade.
Dishwasher safe.

SCRIBER POINT

SCRIBER POINT FOR KEN518-4330K

Reversible Ratchet Ring Wrenches

For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from chrome vanadium steel bi-hex rings.

25 Offset

Metric *Single hexagon

Norbar Torque Wrenches

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

16mm Spigot 'P' Type (Pre-set)

Designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a Torque Wrench Analyser or similar instrument. Setting system is designed to discourage unauthorised alteration. Coloured end seals are provided to identify the wrench to a particular operator, torque setting or calibration period.

Torque Range: 30-300Nm 22-220ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

Industrial Combination Spanners

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.
Conform to:
5.5mm - 25mm, 1/4" - 1" AF - DIN 3113.
26mm - 95mm, 11/16" - 2" AF - ASME B107.6.
1/8" - 1/2" Whitworth - DIN 3113 & BS192:1982.
9/16" - 7/8" Whitworth - ASME B107.6 & BS192:1982.

Whitworth