Cooling System & Radiator Cap Pressure Tester

Designed for the pressure testing of cooling systems and radiator caps up to 35psi (2.5bar). Suitable for use on most makes of car and commercial vehicles, including: Mercedes, Ford, Chrysler, Peugeot, Honda, Lexus, Mazda, Suzuki, Toyota, Nissan, Opel, Volkswagen, Saab, Volvo, Audi, Citroen, Fiat and BMW.
Contents: 14 radiator pressure testing caps, for use in testing cooling systems for leaks. Two cap adaptors, sizes 2-3 and 4-5, for testing radiator cap release pressure and seal condition. Two 200psi coolant hoses (5/16" and 3/8"), for use with T-adaptor for in-line pressure testing. T-adaptor for creating in-line pressure testing set-up. Two 3/4" hose clips.

Kennedy Hand Stamps

Drawn carbon steel nickel-plated hand stamps with chamfered edges to prevent accidental damage to workpiece.

Heavy-Duty Snipe Nose Pliers with Cutter

Chrome vanadium steel with heavy-duty insulated handle with slip guard. Double polished head and joint. Serrated parallel jaws for gripping flat workpieces and a serrated curved jaw for gripping nuts, etc. Also with side cutter with induction hardened cutting edges and serrated gripping and crimping jaws behind the head.

Hexagon Ball Drivers

Can be used at angles of up to 30 from the screw head, making them ideal for awkward access areas. Manufactured from hardened carbon steel, available with fluted driver handles, L-wrench pattern or T-handle.

Cabinet Screwdrivers

Traditional design cabinet screwdrivers with matt grey high impact plastic handles to ensure a firm yet comfortable grip allowing constant use, giving maximum torque. Chrome alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life.

Flared

Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.

Spares

SPARE JAWS & SPRINGS FORKEN518-8750K

Ring Slogging Wrenches

Manufactured to DIN 7444.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Kennedy Club Hammers

Kennedy Club or lump hammers have fully forged and heat-treated hammer heads with flat striking faces and chamfered edges.

They are suitable for use with cold chisels, brick bolsters, star drills and masonry nails in confined work areas with little room for a full arc swing, the wide face makes it ideal for striking chisels and punches.

Available in a range of weights with hickory or fibreglass shafts.

Hickory Shaft

With fine grain, forged steel head, hardened and tempered with polished faces.

Ratchet Combination Spanners - Metric

Ratchet combination spanners ideal for reaching in to awkward spaces. Ring head has a reversible ratchet system that gives small increments of only 5°. Both heads are angled at 15° for side access. Satin chrome finish. Conform to ISO 1711-1.

Mechanics Screwdrivers

Featuring a classic slimline design favoured by the automotive industry. Black high impact plastic handles. Chrome finish alloy steel blades with satin finish. Magnetic tips, hardened and ground to prolong tool life. Flat blades have hexagon bolster to allow extra torque to be applied using a spanner.

Flared