High Grip Pound Thru' Screwdrivers

Through blade screwdriver with chrome vanadium steel blades and striking heads, suitable for striking with a hammer to free up seized screws. Fully hardened magnetic tips. Comfortable moulded grip. Hexagon blades.

Crosspoint

Crosspoint screws virtually eliminate the screwdriver slippage if the correct size is used. The No.2 screwdriver would be suitable for most applications.

16mm Spigot End Fittings

Metric

Flare End

Quick-Set Torque Drivers

Micrometer style adjustment allows easy accurate setting. Slipping action at pre-set torque eliminates over-tightening. The adjustment ring automatically disengages when the tool is in use to prevent accidental adjustment. Stainless steel shafts. Anodised aluminium handles. Suitable for electrical, electronics and instrument assembly works. Manufactured to ISO 6789:1992



Torque Range: 5-50 Ibf.in

For further specification on this product please see the attached PDF under the catalogue PDF links tab.

Kennedy Professional Ai-Bronze Spark Resistant Safety Tools

Spark resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive
environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark
resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapors or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.

Spark Resistant Wedges

Kennedy Cases - Accessories

NB: complete case is shown for illustration only. Case, contents and tools are not included.

Kennedy® Parallel Pin Punches

Ideal for driving tight fitting pins out of mechanical assemblies or realigning holes to fit dowel pins. Manufactured from hardened and tempered steel. With a knurled body for extra grip. Conform to BS 3066.

Cabinet & Chest Spares

To suit Kennedy, Senator and Yamoto cabinets and chests.

Gas Spring/Lid Stays

For cabinet and chest compatibility, please refer to our catalogue.

Bulldog Taper Mouth Shovels

Used as an alternative to the square mouth for shovelling out or backfilling trenches, concrete mixing, working tarmac etc. The tapered blade allows for clearing out tight corners.

5222

Type: all metal.
Handle type: MYD metal framed.
Shaft: steel.
Blade material: steel epoxy coated.
Blade width: 190 - 172mm.
Blade height: 280mm.
Overall length: 990mm.

Kennedy Professional Hand Saws

The fast cutting Meteor hand saw from Kennedy Professional is a 550mm (22'') long saw with a hardened & tempered steel blade that have stay sharp hardened teeth, sharpened on 3 edges to ensure the blade's teeth cut on both the forward stroke and the back stroke. Each saw is fitted with a dual material grip handle handle for comfort and a finger line for accurate cutting.

The Meteor is ideal for cutting chipboard, block board, timber, plywood, hardboard, plasterboard, PVC & laminates!

Available as:
7TPI coarse cut saw Order code: KEN-597-4900K.
11TPI fine cut saw Order code: KEN-597-4920K.

Meteor Hand Saw Fine Cut

Hammer Wedges

Manufactured from high grade steel.