Industrial Open Ended Spanner Sets

Made from chrome vanadium steel with a satin finish body and highly polished heads, with a 15 offset. Conform to DIN 3110 & BS 192 : 1982.

11 Piece - Metric

Contents:
6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27 and 30 x 32mm.

3/8" Square Drive Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

AF Deep

Butane Soldering Torch - Heavy Duty

A heavy duty powerful heat tool with self ignition for one handed operation, butane powered simple to refill. The gas fuel level can be seen clearly in the transparent 38ml tank. Machined aluminium barrel with anti-roll flat on handle, to prevent rolling when not in use. Fully adjustable tip temperature control. Supplied with pointed soldering tip. Makes this tool capable of soft soldering, brazing, sweating and heat expansion of seized fasteners. Protective case with auto gas shut off. Can be used with hot knife, gas torch and deflector tips. Supplied without butane.
Power rating: 30W to 125W
Soldering temperature: 250C to 550C
Maximum temperature: 1300C
Run time: 200 minutes (full tank of fuel at mid heat level setting)
Overall length with cap: 254mm
Overall length with soldering tip: 245mm
Overall length with torch tip: 172mm

Extension Bars

Manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Sizes 1/2" and above feature a hole to accommodate a pin and ring to prevent accidental removal for added security.

5/16" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Crosspoint

Precision Screwdrivers

Have nickel chrome molybdenum steel blades, hardened and tempered. Chrome plated, with swivel tops which resist oil and acid. Supplied in plastic cases. Ideal for jewellers' and watchmakers'.

Parallel

Rubber & Nylon Hoses

Suitable for high pressure use with 1/8" BSP end fittings. Rigid tubes are solid steel for use with all grease guns.

Chuck Style Tap Wrenches

Used in hand tapping operations and provide the reach and leverage needed for accurate tapping in tight spaces. Heavy duty ductile steel body with knurled chuck, 4 equalizing jaws to hold the tap true and sliding T-bar which can be used when tapping against a shoulder or other obstructions. Individually boxed.

English Type

Mini 1/4 " A/F Female hexagon socket Torque Limiting Screwdriver

1/4 " A/F Female hexagon socket which will accept screwdriver bits. Can be converted to a Male end by using the appropriate adaptor. Can be pre-set to any torque value within range by using a Torque Calibration Analyser. Can be fitted with 'Impact Free Resetting' option. Range: 2-135cN.m. 3ozf.in - 12lbf.in.
Overall length: 200mm.
Weight: 200g.

Rutland™ Stainless Steel Garden Tools

Rutland™ garden tools premier stainless steel range of gardening tools have highly polished and ground stainless steel blades, that will not get so clogged up and will cut cleanly through even the heaviest types of soil.

The swan neck socket and blade design greatly improves the strength, making them more resistant to bending.

The deep sockets of the single piece blade casting ensure they are securely fixed to hard wearing polypropylene 'YD' handles and shafts.

Stainless Steel Border Fork

The prongs of a Rutland™ border fork are closer together then that of a digging fork, making them ideal for use in or around established borders.

The prongs are shaped for easier soil penetration, ideal for removing plants, tending compost piles and aerating & turning soil.

Blade Width: 140mm
Blade Length 910mm