High Grip Pound Thru' Screwdrivers

Through blade screwdriver with chrome vanadium steel blades and striking heads, suitable for striking with a hammer to free up seized screws. Fully hardened magnetic tips. Comfortable moulded grip. Hexagon blades.

Flared Tip, Round Blade

Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.

Ring Slogging Wrenches

Manufactured to DIN 7444.



Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Thorex Nylon Faced Hammers

Chrome plated zinc heads with two screw on nylon striking faces.

Wooden Handle

Disc Magnets

Nickle plated neodymium disc and block magnets Magnetic poles on both faces, supplied in tubes. Maximum working temperature 100°C

Disc

1/2" Square Drive Hub Nut Impact Socket Set - 7 Piece

These extra deep sockets are 6 point single hexagon with a black oxidised finish and conform to DIN 3129, Inch SAE and USA Federal Standard GGG-W-660A.
The impact resistant storage case contains:
29, 30, 32, 34, 35, 36 & 38mm 1/2" square drive sockets.

Standard Sockets

Chrome vanadium. Bi-hexagon. (12 point). This range of 1" (25mm) series sockets is the ultimate for high torque hand applications. The single hexagon design gives strength and reliability under heavy loads. Used extensively in heavy plant, rail, shipyard and oil rig industries. The 12 point bi-hexagon side drive design will give a higher torque than normal sockets. Manufactured from chrome vanadium and are fully chrome plated with a mirror finish and aluminium free to ensure non sparking. Chamfered leading edge ensures easy fastener location. Used for tightening and untightening nuts where the threaded stem of the mating fastener prevents access with standard length sockets.

Metric

Kennedy Double Ended Ring Spanner Sets

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838, BS 192 : 1982 & BS 3555 : 1998.

10 Piece - AF

Contents: 1/4" x 5/16", 5/16" x 3/8", 3/8" x 7/16", 7/16" x 1/2", 1/2" x 9/16", 9/16" x 5/8", 5/8" x 11/16", 11/16" x 3/4", 3/4" x 7/8" & 15/16" x 1".

Valve Seal Ring Pliers

For the easy removal of most valve stem seals in multi-valve engines in restricted areas above the cylinder head. Gripping serrations inside the jaws aid gripping the outside diameter of the valve stem seal. Steel pliers with double rivetied metal handles.
Overall length: 270mm. Reach: 80mm.

Straight Head Valve Seal Ring Pliers - Extra Long

Fatmax® Ratchet Adjustable Wrenches

Ratchet jaw eliminates the need to break from the fastener. Forged CrV construction. Patented design. Available in 150mm (6"), 250mm (10") and 300mm (12") sizes.



Ratchet jaw eliminates the need to break from the fastener. Forged CrV construction. Patented design.
Available in 150mm (6"), 200mm (8"), 250mm (10") and 300mm (12") sizes.

Spare Shoes for Heavy, Medium & Deep Throat G-Clamps

Protects your workpiece