Lever Reversible Steel Handle Flexi-Joint

Fully chromed lever type. All steel handle. The hinged joint gives additional capability in areas of restricted access.

1/2" Square Drive

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Tri-Wing

Kennedy Rotary Chemical Dispensing Pump

An easy to operate manual rotary chemical pump that is used to dispense chemicals from a bulk drum into a suitable container. Designed for use with fluids which a regular cast iron or steel barrel pump cannot be used. Pump body is made from glass filled polypropylene with Ryton veins. All seals are from Vitron rubber and all hardware is stainless steel. Strainer fitted at the suction tube inlet stops contaminants from entering the pump. Complete with threaded polypropylene suction tube and a choice of 2" bung adaptors for use on both plastic and metal drums of capacities 15 gallons (50 litres) and 55 gallons (205 litres). For use with water-based fluids, antifreeze, acids, chemicals etc., in addition to all petroleum-based products. Delivery 5 litres (1.3gal. per 20 turns of the handle). Weight 3kg.

DO NOT USE with Acetone, Lacquer, Mineral Oils, Solvents or Turpentine.

Body Repair Kit Spares

Spares for hydraulic hand pumps

Extension Tubes

Long Extension Tube for collision repair kits

Ball Hex Sockets

Chrome plated alloy steel. For use on hexagon socket head screws with a swivel angle up to 25 each side.

Cable Ties

Suitable for securing or retaining various shapes and sizes of object. Supplied in packs of 100.

1/4" AF Hexagon Drive Screwdriver Bits

All Kennedy screwdriver bits have a hardness of 58 - 62HRC. High alloy chrome molybdenum steel for use on hand and power tools.

Flat

Chrome Molybdenum Impact Sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

A/F

3/4? Drive Inch Size, Standard Length, 6-Point
Conform to: SAE, USA Federal Standard GGG-W-660A.

Senator® Hand Stamps

Standard quality, with strength up to 800N/mm2. Hardness at the engraving: 58 - 60HRC. Type of characters according to DIN 1451.

Letter & Number Stamps

Impact sockets

Impact sockets and accessories are manufactured from high quality chrome molybdenum steel. Black oxidised finish with permanent laser etched markings. Conform to: Metric DIN 3129, Imperial SAE USA Federal Standard GGG-W-660A.

Impact Hexagon Bit

Drivers 1/2" sq. dr. Hexagon sizes: 6, 7, 8, 10, 12, 14, 15, 17, 18 & 19mm