Double-Ended Ring Spanners

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838, BS 192 : 1982 & BS 3555 : 1998.

A/F

SiteSafe® Contractor Flat Cold Chisels c/w Hand Guard

Manufactured from high quality octagonal chrome vanadium steel with a ground cutting edge, in accordance with BS 3066. For use on brickwork, masonry and cold metals.

Industrial Combination Spanners

Manufactured form industrial quality chrome vanadium steel, polished and hardened jaws and bi-hexagon ring with satin finish body, corrosion resistant. The open-ended jaws are offset at 15 angle for positive torque application and easier location on the fastener. Suitable for automotive, maintenance and engineering applications. Conform to ASME B107.9M 1994

Bulldog Square Mouth Trench Shovel with 'T' Handle

5212
Used for trench work, concrete mixing, working tarmac and shovelling.

Type: open socket.
Handle type: Ash T-Handle.
Shaft: Ash.
Blade material: solid forged steel.
Blade width: 165mm.
Blade height: 320mm.
Overall length: 1030mm.

Taping Knives

Premium tempered stainless steel blade mounted in a rigid alloy back. The blade is tapered for easier use in tight corners. Ergonomic contoured Durasoft handle for improved comfort and control.

Kennedy Professional Roller Tool Cabinets

Manufactured from heavy gauge steel with two-wall construction side panels and welded joints for added rigidity. Coated in a hard wearing epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors with brakes fitted to two. Castors are rated to 100kg capacity standing load per castor. Drawer loads should be evenly distributed. Roller cabinets are not suitable for frequent relocation when loaded.

7 Drawer Roller Tool Cabinet
Overall size (W x D x H): 690 x 460 x 890mm.
Drawer sizes (W x D x H):
591 x 410 x 51mm (4).
591 x 410 x 102mm (2).
591 x 410 x 204mm (1).

What "Car Mechanics" magazine say..."Recommended"

"This is similar to the Best Buy (KEN-594-5500K), but obviously bigger and dearer. Also the, ever useful, storage compartment is replaced by extra drawers. One common factor, though, is the excellent build and design quality. Again, all drawers are on bearing slides. And the deep drawers even have double sliders on each side – to cope with heavy tool loadings. The wheels are the same rubber-rimmed metal models too, and they also feature grease screws. Kennedy has even included a decent, if rather thin, rubber cab top, plus drawer liners."

Norbar Torque Wrenches

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

1/2" Square Drive 'P' Type Ratchet (Pre-set)

Designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a Torque Wrench Analyser or similar instrument. Setting system is designed to discourage unauthorised alteration. Coloured end seals are provided to identify the wrench to a particular operator, torque setting or calibration period. With reversible ratchets.

Torque Range: 10-100Nm 8-80ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

Body Repair Kit Spares

Spares for hydraulic hand pumps

Repair Kit

3/8" Square Drive Bi-Hexagon Sockets

Chrome vanadium. Bi-hexagon. (12 point). All have a ball-retaining groove on each face of the square drive, which ensures a positive fit with all 3/8" drive accessories.

A/F

Rutland™ Replacement Blades

Rutland Bow Saw Replacement Blades